SetaVap 2 Reid Automatic Vapour Pressure Tester

Note : Due to distribution agreements, Paragon Scientific may be restricted as to where these products can be sold to. We kindly advise you to contact the Sales team directly at sales@paragon-sci.com with your requirements.

SetaVap 2 Reid Automatic Vapour Pressure Tester

Part No: 81000-2

Availability: In stock Shipping within 4 - 6 Weeks

Quick Overview

SetaVap 2 Reid Automatic Vapour Pressure Tester
SKU
81000-2
Please Login to Account

Please Login / Register to view prices.

The Setavap 2 automatic vapour pressure tester is used for the measurement of gasoline, solvents, light crude oils, and other similar products using the "Mini" method. Fully evacuated chamber technology guarantees that the sample is tested under a full vacuum, as required by the "Mini" test methods, unlike the expansion technologies that rely on moving pistons.

 

 ADDITIONAL INFORMATION:

All functions are accessed via a two button keypad and a rotary control. The digital display leads the operator through the test sequence, displays the instrument status and the test results. An audible prompt is sounded when an action is required from the operator.

A sample is injected through a septum into a fixed volume chamber that is maintained at 37.8 °C ± 0.1 °C. The vapour to liquid ratio is 4:1. The pressure is automatically measured at one minute intervals until three readings are within 0.1 kPa, which determines the end of the test.

Results can be displayed as total pressure (Ptot), dry vapour pressure equivalent (DVPE), EPA requirements, or Reid (crude) using pre-programmed correlation equations, and may be printed via the integral RS232 port and optional 81002-2 printer. A facility is included to allow two part tests (Pabs) to be conducted at 37.8 °C.

All valve operations are automated including sample draining and chamber venting and purging. The valves utilise solvent resistant Kalrez seals. Calibration of temperature and pressure is automated and simple to carry out.

Supplied with: septum holder, waste container, mains lead and instruction manual.

 

SPECIFICATIONS

Test Temperature 37.8 °C (100°F) ±0.1°C
Test Pressure Range 0 to 200kPa ±0.5kPa (0 to 29psi ±0.1psi)
Pressure Resolution 0.1kPa (0.1psi)
Sample Size 3ml
Vapour to Liquid Ratio 4:1
Display Units of Pressure kPa or psi (user selectable)
Vacuum Requirement better than 0.01kPa (abs)
Voltage 110/120V or 220/240V, 50/60Hz (switchable)
Power 70W
Size (HxWxD) 37 x 13 x 20cm
Weight 3.5kg
CCCN Code: Tariff 90262020
More Information
Lead Time 4 - 6 Weeks
Size N/A
Shelf Life N/A
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
We found other products you might like!