Seta MFT Multi Filtration Tester
Note : Due to distribution agreements, Paragon Scientific may be restricted as to where these products can be sold to. We kindly advise you to contact the Sales team directly at firstname.lastname@example.org with your requirements.
Seta MFT Multi Filtration Tester
Part No: 91600-3
The Seta Multi Filtration Tester is a unique and flexible instrument designed to test distillate fuels including gas oil, gas turbine fuel, kerosine, diesel, biodiesel and biodiesel blends. It fully conforms to the latest 'cold soak' filterability test requirements for FAME and Bio-diesel. It is the only tester that performs both existing IP 387/ D2068 methods and correlates with the new D6426 methods, and offers the possibility of testing other types of fuel and adopting future filtration and filterability test procedures.ADDITIONAL INFORMATION
MFT is microprocessor controlled and provides a simple user interface using 2 buttons and the Seta Multifunctional And Rotational Test (SMART) control feature in conjunction with a backlit alphanumeric 4 line display. The SMART control is exceptionally easy to use for selecting different tests, setting parameters and for calibration of the temperature and pressure sensors. The display provides the operator with test procedure information as well as indicating the selected test method, sample temperature, pressure, volume and the test result.
A printer can be connected to provide a permanent record of the test parameters, results and a filterability graph. The software permits the operator to set the test volume of liquid up to 1 litre and a maximum pressure of 200kPa. This allows both specification testing and gravimetric tests to be carried out in conjunction with the appropriate filters and holders.
The fuel sample is drawn from the integral fuel reservoir by the pump, and an efficient pulse damper provides smooth and continuous flow. The pressure and temperature of the fuel are continuously monitored while it is pumped through the specified filter into the waste container. The recorded pressure rise, or the volume of pumped sample that causes a specified pressure to be exceeded, are used by the microprocessor to calculate the test result. Standard tests use 300ml of fuel pumped at 20ml/min.
Verification and re-calibration is simple but secure. The Setalert accessory can be used to alert an operator of the end of the test at distances up to 300 metres.
- Filter forceps
- Mains lead
- Fuel beakers
- Instruction manual
|Filter blocking tendency (FBT) range||1.0 to 30 (low number is best)|
|Filterability quality factor (FQF) range||100 to 1 (high number is best)|
|Power supply||110/120V, 50/60Hz 220/240V, 50/60Hz (switchable)|
|Size (HxWxD)||27 x 43 x 26cm|
|CCCN Code:||Tariff 90268080|
ASTM D2068, IP 387 (Procedures A, B), IP PM EA/08DETAILS OF METHODS
|ASTM D2068||Standard test method for filter blocking tendency of distillate fuel oils|
|IP 387 (Procedures A, B)||This test method describes a procedure for determining the filter blocking tendency (FBT) of distillate fuel oils where the end use demands an exceptional degree of cleanliness.|
|IP PM EA/08||Determination of the filter blocking tendency of fatty acid methyl esters - cold soak and filtration method|
|Lead Time||4 - 6 Weeks|
|Dimensions cm (WxDxH)||27 x 43 x 26cm|