- Home
- Products and Services
- Applications
- Optical Measurement
- Colour Standards
Colour Standards
These standards are ideal for routine calibration of colour measuring instruments, verification of test data and ensuring good inter-laboratory or inter-instrument correlation. The range of liquid standards includes AOCS-Tintometer, ASTM, Gardner, Lovibond RYBN, Pt-Co and Saybolt Colour, the key colour scales applied to oils, fuels & chemicals. They are supplied with full traceability to internationally recognised standards, either UKAS to ISO 17025 (ASTM, Gardner & Saybolt Colour) or the ISO 9001 quality system (AOCS-Tintometer, Lovibond RYBN & Pt-Co Colour). Each standard comes in a 500 ml bottle with a 12-month guarantee of colour stability and full certification including MSDS.
AOCS Tintometer Colour Reference
AOCS Tintometer colour reference standards are manufactured and certified by The Tintometer Limited. These colour standards have been manufactured and tested under the control of Tintometer's ISO 9001 Quality Management System.
ASTM (ASTM D6045, D1500) Colour Reference
ASTM Colour Reference Standards are for routine calibration of colour measuring instruments and verification of test data. These colour standards are dual UKAS certified to the International Standards BS EN ISO / IEC 17025 and ISO 17034.
Gardner (ASTM D1544, D6166) Colour Reference
Gardner (ASTM D1544, D6166) Colour Reference Standards are for routine calibration of colour measuring instruments and verification of test data. These colour standards are dual UKAS certified to the International Standards BS EN ISO / IEC 17025 and ISO 17034.
Lovibond RYBN Colour Reference
Lovibond RYBN colour reference standards are manufactured and certified by The Tintometer Limited. These colour standards have been manufactured and tested under the control of Tintometer's ISO 9001 Quality Management System.
Pt-Co/Hazen/APHA (ASTM D1209) Colour Reference
Pt-Co/Hazen/APHA Colour (ASTM D1209) colour reference standards are manufactured and certified by The Tintometer Limited. These colour standards have been manufactured and tested under the control of Tintometer's ISO 9001 Quality Management System.
Saybolt (ASTM D6045, D156) Colour Reference
Saybolt (ASTM D6045, D156) Colour Reference Standards are for routine calibration of colour measuring instruments and verification of test data. These colour standards are dual UKAS certified to the International Standards BS EN ISO / IEC 17025 and ISO 17034.
Browse By
- Products
- Calibration Standards
- Viscosity Standards
- General Purpose Viscosity Reference Standards
- Cold Cranking Simulator Viscosity
- Low Temperature Viscosity
- Flow Cup Viscosity
- Cone and Plate Viscosity
- High Temperature Viscosity
- High Temperature Viscosity Standards - 100 to 150 °C
- Medical Viscosity
- Mineral Oil Rotational Viscosity
- Pure Water Viscosity Standard
- Silicone Rotational Viscosity
- Small Sample Viscosity
- Special Blend Viscosity
- Colour Standards
- Conductivity Standards
- Density Standards
- Refractive Index Standards
- Relative Density Standards
- Secondary Working Flash Point Standards
- Sulfur Standards
- Total Acid Number (TAN) Standards
- Total Base Number (TBN) Standards
- Viscosity Check Oils
- Certified Ethanol Standards - % ABV (Alcohol by Volume)
- Smoke Point Reference Fuel Blends (RFBs)
- Viscosity Standards
- Certified Reference Materials
- Laboratory Reagents
- Custom Blends
- Viscometer Bath Media
- Calibration Standards
- Equipment
- Viscometer Bath Media
- Laboratory Test Equipment
- Corrosion & Rust
- Colour Measurement
- Cloud Point & Pour Point Measurement
- Cold Filter Plugging Point (CFPP) Measurement
- Flash & Fire Point Measurement
- Foaming, Air Release & Emulsification
- H₂S and Particle Count
- Laboratory Baths & Circulators
- Refractometers
- Thermometers
- Polarimeters
- Vapour Pressure Measurement
- Viscosity Baths
- Viscosity Bath Accessories
- ASTM Glassware
- Applications
- Industries
My Wish List
