Viscometers
Manufactured in accordance with ASTM D2162, the primary method for viscosity standards manufacture. They are fully traceable to national standards and are test equipment compatible. They are dual UKAS certified to the International Standards BS EN ISO / IEC 17025 and ISO 17034.

These standards ensure full compliance to ASTM & IP test method protocol and are fully traceable to national standards. They are dual UKAS certified to the International Standards BS EN ISO / IEC 17025 and ISO 17034.

These standards are especially designed to be used for the calibration and verification of the Cold Crank Simulator (CCS), testing to ASTM D5293. They are dual UKAS certified to the International Standards BS EN ISO / IEC 17025 and ISO 17034.

These standards are especially designed for use in DIN, Ford, ISO, Shell and Zahn flow cups. Certified at 20°C and 25°C, each value is tested to ASTM D2162 for viscosity measurement and ASTM D1480 for Density measurement, certified to the International Standards BS EN ISO / IEC 17025 and ISO 17034.

These standards are widely used for the verification of viscometers at sub zero temperatures on a routine basis. Fully ISO 17025 and ISO 17034 certified, the use of these standards can also help provide confidence in overall system functionality.

These high temperature standards are tested at 135 °C and 150 °C, and ensure full compliance to ASTM & IP test method protocol and are fully traceable to national standards. They are dual UKAS certified to the International Standards BS EN ISO / IEC 17025 and ISO 17034.

These high temperature standards are tested at 100°C, 110°C, 120°C, 130°C, 140°C and 150°C, and ensure full compliance to ASTM & IP test method protocol and are fully traceable to national standards. They are dual UKAS certified to the International Standards BS EN ISO / IEC 17025 and ISO 17034.

Manufactured in accordance with ASTM D2162, the primary method for viscosity standards manufacture. They are fully traceable to national standards and are test equipment compatible. They are UKAS certified to the International Standards BS EN ISO / IEC 17025.

These viscosity standards are specifically designed for Rotational Viscometers. Dual certified to both ISO 17025 and ISO 17034 under United Kingdom Accreditation Service (UKAS), they provide both calibration and verification options for rotational viscometer test equipment.

They are dual UKAS certified to the International Standards BS EN ISO / IEC 17025 and ISO 17034. and certified at 20 °C and 25 °C. Supplied in convenient 600mL 'use from pack' format.

These standards are dual UKAS certified to the International Standards BS EN ISO / IEC 17025 and ISO 17034. and certified at 40 °C and 100 °C. Manufactured specifically for the users of Automated Houillon Viscometer and other similar type test equipment.

Paragon ISO 17025 / ISO 17034 certified pure water viscosity standards are for the calibration and verification of glass capillary viscometers and other viscosity measuring equipment where operating temperature is controlled precisely.

Special blends which are available ex stock. For the calibration and verification of glass capillary viscometers and other viscosity measuring equipment where operating temperature is controlled precisely.

- Products
- Calibration Standards
- Viscosity Standards
- General Purpose Viscosity Reference Standards
- Cold Cranking Simulator Viscosity
- Low Temperature Viscosity
- Flow Cup Viscosity
- Cone and Plate Viscosity
- High Temperature Viscosity
- High Temperature Viscosity Standards - 100 to 150 °C
- Medical Viscosity
- Mineral Oil Rotational Viscosity
- Pure Water Viscosity Standard
- Silicone Rotational Viscosity
- Small Sample Viscosity
- Special Blend Viscosity
- Certified pH Buffer Solutions
- Colour Standards
- Conductivity Standards
- Density Standards
- Refractive Index Standards
- Relative Density Standards
- Secondary Working Flash Point Standards
- Sulfur Standards
- Total Acid Number (TAN) Standards
- Total Base Number (TBN) Standards
- Viscosity Check Oils
- Certified Ethanol Standards - % ABV (Alcohol by Volume)
- Smoke Point Reference Fuel Blends (RFBs)
- Viscosity Standards
- Certified Reference Materials
- Laboratory Reagents
- Custom Blends
- Viscometer Bath Media
- Calibration Standards
- Equipment
- Viscometers & Viscometer Bath Media
- Glass Capillary Viscometers
- BS/IP/RF U-Tube Reverse Flow for Transparent and Opaque Liquids
- BS/IP/SL Viscometer for Transparent Liquids
- BS/IP/SL(S) Viscometer for Transparent Liquids
- BS/IP/MSL Viscometer for Transparent Liquids
- BS/U-tube Viscometer for Transparent Liquids
- BS/U/M Miniature Viscometer for Transparent Liquids
- Cannon-Fenske Routine Viscometer for Transparent Liquids
- Cannon-Fenske Opaque Viscometer for Transparent and Opaque Liquids
- Houillon ISL® Viscometer for Transparent and Opaque Liquids
- Ubbelohde Viscometer for Tranparent Liquids
- Zeitfuchs Cross-Arm Viscometer for Transparent and Opaque Liquids
- Viscometer Bath Media
- Glass Capillary Viscometers
- Testing & Calibration Services
- Laboratory Test Equipment
- Corrosion & Rust
- Colour Measurement
- Cloud Point & Pour Point Measurement
- Cold Filter Plugging Point (CFPP) Measurement
- Flash & Fire Point Measurement
- Foaming, Air Release & Emulsification
- H₂S and Particle Count
- Laboratory Baths & Circulators
- Refractometers
- Thermometers
- Polarimeters
- Vapour Pressure Measurement
- Viscosity Baths
- Viscosity Bath Accessories
- ASTM Glassware
- D86 Distillation
- D1160 Distillation
- D1319 Hydrocarbon:(FIA)
- D1401 Water Seperability
- D2500 Cloud Point
- D3242 Acidity In Fuel
- D524 Ramsbottom
- D525 Oxidation Stability
- D611 Aniline Point
- D6371 Cold Filter Plugging Point
- D892 Foaming Of Lube Oils
- D943 Oxidation
- D97 Pour Point
- Glass Capillary Viscometers
- BS/IP/RF U-Tube Reverse Flow for Transparent and Opaque Liquids
- BS/IP/SL Viscometer for Transparent Liquids
- BS/IP/SL(S) Suspended Level Short Form for Transparent Liquids
- BS/IP/MSL Viscometer for Transparent Liquids
- BS/U-tube Viscometer for Transparent Liquids
- BS/U/M Miniature Viscometer for Transparent Liquids
- Cannon-Fenske Routine Viscometer for Transparent Liquids
- Cannon-Fenske Opaque Viscometer for Transparent and Opaque Liquids
- Houillon ISL® Viscometer for Transparent and Opaque Liquids
- Ubbelohde Viscometer for Tranparent Liquids
- Zeitfuchs Cross-Arm Viscometer for Transparent and Opaque Liquids
- Viscometers & Viscometer Bath Media
- Applications
- Industries