Seta Oxi-Cor Bath
Part No: 15550-3
A stainless steel water or oil bath with a temperature range of ambient +5°C to 150°C, temperature controlled to ±0.1°C by a top mounted thermostir circulator with integral over-temperature and low fluid level protection devices.
The bath has four test stations. Each test station has a lid with a hook for suspending either a copper corrosion test vessel (11500-0) or a test tube support (11420-0). A test tube support can hold up to three test tubes (11590-0). Any combination of copper corrosion vessels and test tube supports may be used.
One or more of the four lids may be replaced by oxidation vessel 15802-0. Pressure in the vessel can be monitored automatically with a 15450-2 Auto Oxidation Control Unit (Option 1), or manually with a 15611-0 Portable Cambridge Pressure Recorder (Option 2), or a 15600-0 Oxygen Pressure Gauge (Option 3).
A Silver Corrosion Conversion Kit (11510-0) is available to convert test stations to hold Seta 11430-0 glassware.
Supplied with: 4 lids, mains lead and instruction manual.
|Temperature range||Ambient +5°C to 150°C|
|Bath capacity||35 litres|
|Voltage||110/120V, 50/60Hz 220/240V, 50/60Hz|
|Size (HxWxD)||41 x 45 x 33cm|
|CCCN Code:||Tariff 902410100|
ASTM D130, ASTM D4048, ASTM D4814, ASTM D525, ASTM D5304, ASTM D7667, ASTM D7671, ASTM D873, BS 2000-112 & IP 112, BS 2000-138 & IP 138, BS EN ISO 2160 & BS 2000-154 & ISO 2160, BS EN ISO 7536 & BS 2000-40 & ISO 7536, DIN EN ISO 2160, DIN EN ISO 7536, IP 154, IP 227 (obs), IP 40, IP 611
DETAILS OF METHODS
|ASTM D4814||General Specification for Automotive Spark Ignition Engine Fuels|
|IP 227 (obs)||Corrosiveness to Silver of Aviation Turbine Fuels|
|BS EN ISO 2160 & BS 2000-154 & ISO 2160||Copper Corrosion from Petroleum Products by the Copper Strip Tarnish Test|
|ASTM D4048||Standard test method for detection of copper corrosion from lubricating grease|
|BS 2000-112 & IP 112||Determination of corrosiveness to copper of lubricating grease. Copper strip method|
|ASTM D5304||Oxidation Stability of Gasoline (Induction Period Method)|
|IP 154||Corrosiveness to Copper - Copper Strip Test|
|IP 40||Determination of oxidation stability of gasoline - Induction period method|
|ASTM D525||Standard test method for oxidation stability of gasoline (induction period method)|
|DIN EN ISO 2160||Petroleum products. Corrosiveness to copper. Copper strip test|
|BS EN ISO 7536 & BS 2000-40 & ISO 7536||Methods of test for petroleum and its products. Petroleum products. Determination of oxidation stability of gasoline. Induction period method|
|BS 2000-138 & IP 138||Methods of test for petroleum and its products. Determination of oxidation stability of aviation fuel. Potential residue method.|
|DIN EN ISO 7536||Determination of oxidation stability of gasoline by the induction period method|
|ASTM D130||Standard Test for Corrosiveness to Copper from Petroleum Products by Copper Strip Test|
|ASTM D7671||Corrosiveness to Silver by Automotive Spark–Ignition Engine Fuel–Silver Strip Method|
|IP 611||Corrosiveness to silver of automotive gasoline - Silver strip method|
|ASTM D7667||Corrosiveness to Silver by Automotive Spark-Ignition Engine Fuel—Thin Silver Strip Method|
|ASTM D873||Standard test method for oxidation stability of aviation fuels (potential residue method)|
|Lead Time||4 - 6 Weeks|
|Dimensions cm (WxDxH)||(HxWxD) 520 X 485 X 330 mm|