Seta Multiflash Cleveland Flash Point Tester

Seta Multiflash Cleveland Flash Point Tester

Part No: 34300-2

Availability: In stock Shipping within 4 - 6 Weeks

Quick Overview

Seta Multiflash Cleveland Flash Point Tester
Please Login to Account

Please Login / Register to view prices.

 Seta Multiflash is an automatic Cleveland flash point tester, the 34300-2 Cleveland module is used with the 34000-0 MultiFlash Universal Base unit.

The module conforms precisely to national and international Cleveland open cup flash point test methods. It comprises a sample cup, temperature probe, flash/fire detector, and a DIPS pod (Sweeping, Ignition, Pilot, Stirrer) containing the ignitor sweeping mechanism with co-axial gas/electric ignitor.

Interchanging the test module is straight forward and completed in just a few minutes, the base unit recognises that the Cleveland module is connected and instantaneously sets up standard test parameters and calibration data.


The flash point Test Area consists of a removeable sample cup in a thermal insulation ring, and a probe block for mounting the flash / fire detector and sample temperature probe. The sample cup is heated by the hotplate within the 34000-0 Universal Base Unit.

The DIPS pod contains the ignitor sweeping mechanism with a coaxial gas jet / electric hot wire ignitor, and a snuffer that extinguishes any flames in the sample cup at the end of the test. The sample temperature probe is a class A PRT, and flash / fire detection is by an ionisation ring.

Safety features include an initial sweep to check that the sample is below its flash point at the start of the test and a PRT check to ensure that the correct probe is connected and is immersed in sample. When in search mode, the software limits the maximum temperature to 50°C above "expected flash". The snuffer automatically deploys at the end of the test or if the independant fire detection probe (mounted over the test area) detects a flame. The hotplate in the 34000-0 is equipped with a cut-out to protect against over-temperature.

The optional 34008-0 Cooling Boost Module allows the test area to be rapidly cooled in between tests by a blast of compressed air.

Supplied with: DIPS pod, Test Area, Ignitor, Flash / Fire Detector, Sample PRT, interconnection leads, and instruction manual. Note: 34000-0 Universal Base Unit required for operation.


  • Temperature Range: Ambient to 400°C
  • Heating: Hotplate
  • Post Test Cooling: Fan assisted or Forced Air (Requires 34008-0 Cooling Boost Module option)
  • Post Test Cool-down Time (90°C to 50°C): 9 minutes (Fan) 6 minutes (Forced Air)
  • Ignitor: Quick-fit coaxial gas jet / electric hot wire, user selectable (Electric hot wire pilot light for gas jet)
  • Temperature Probe: Class A Platinum Resistance Thermometer, °C or °F
  • Flash / Fire Detection: Ionisation Ring
  • Gas Supply (gas jet ignitor): Laboratory gas, 3kPa (0.44psi) maximum pressure
  • Air Supply (forced air cooling): Dry compressed air, 670kPa (100psi) maximum pressure
  • Voltage: 110/120V or 220/240V, 50/60Hz, (switchable)
  • Power: 1kW
  • Size (HxWxD): 34 x 45 x 42cm
  • Weight: 20kg
  • CCCN Code: Tariff 90268020


  • Fully self-contained flash/fire point test module
  • Exactly conforms to the requirement of Cleveland test method
  • Automatic set up of test parameters
  • Gas or electric ignition
  • Automatic heating control, ignition & flash/fire detection
  • Automatic test results & end of test audible warning
  • Automatic snuffer
  • Centigrade or Fahrenheit temperature display
  • Automatic barometric correction


AASHTO T48, ASTM D92, BS 2000 Parts 36 & 403 (obs), DIN 51 376, EN ISO 2592, IP 36, JIS K2265, NF T60-119


  • DIN 51 376: Flash And Fire Points by Cleveland Open Cup
  • AASHTO T48: Flash Point
  • NF T60-119: Cone Penetration of Petroleum
  • JIS K2265: The Multiflash-PM fully automates and conforms precisely to national and international Pensky- Martens Closed Cup standard test methods.
  • ASTM D92: Standard test method for flash and fire points by cleveland open cup
  • IP 36: Determination of flash and fire points - Cleveland open cup method (ISO 2592:2000)
  • EN ISO 2592: Flash Point
  • BS 2000 Parts 36 & 403 (obs): Flash point
More Information
Lead Time 4 - 6 Weeks
Dimensions cm (WxDxH) (HxWxD): 47 x 42 x 34cm
Size N/A
PDF's Flash Point Information SheetFlash Point Information Sheet
Shelf Life N/A
Tarriff Code 90268020
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account