TV12LT Viscosity Bath 12L

General

Tamson viscometer and Tamson calibration baths are specially designed for tests that require ultra precise temperature control, or processes that need to be followed visually, e.g. viscometry (conforms to ASTM 445, IP71-1), thermometer and sensor calibration, density and reaction rate measurement, etc.
The bath is fitted with a double window of which the front pane is detachable for cleaning purposes. The window is heated preventing built up of condensate.

Construction

The stainless steel construction ensures exceptionally stable temperatures which is further improved by an ingenius stirring mechanism with baffle plates. All wetted parts are made of stainless steel and PTFE, providing resistance against all usual bath fluids. The bath is fitted with adjustable feet for leveling.The cover of the bath has 4 round 51 mm holes with lids, for suspending glass capillary viscometers in holders. The use of themo insulated windows and window heating ensures clean sight. A permanent LED light is located in the top plate to supply clear light and guarantee optimal visibility inside the bath. A bath overflow outlet protects against expanding bath oil when the bath media is too high.

Agitation

A vane type stirrer with maintenace free bearings moves the bath fluid past a special heater

Span

All baths can be operated from -40 up to 20°C (-40..68°F).

Safety

The bath conforms to CE-regulations. Further the bath is equipped with a mechanical over temperature device which trips when in case of malfunction the bath exceeds the preset maximum temperature. This feature guarantees safe around the clock operation.

Accuracy

The system overall accuracy is within ± 0.005°K
Fine adjustment and offset
After the bath has stabilised the set point may be more accurately adjusted in the range of –5.00° to + 5.00°, if necessary.

Options
- Optical Level indicator 07T0080

Item Unit TV12LT

Ordering code:
230V/50Hz 00T0410
115V/60Hz 00T0415
230V/60Hz 00T0420

Range -40..20°C/-40..68°F
Reading °C or °F menu selectable
Interface RS232
Setting ± [°C/F] 0.01
Stability  [°K] std dev 0.004
min/max ±0.014
Uniformity [°K] std dev 0.004
min/max ±0.013
Heating [W] 500 + 700
Heaters 2
Bath volume [L] 15
Number of lids 1 lid with 4 x round diameter 51mm
Window [mm] 246 x 268
Opening bath [mm] 248*73
Depth [mm] 300
Length [mm] 740
Width [mm] 425
Height [mm] 720
Weight [kg] 65
Power [Watt] Minimum 200
Nominal 800
Maximum 2100
CE: All models conform to CE regulations

Depth [mm] 300
Length [mm] 740
Width [mm] 425
Height [mm] 720
Weight [kg] 65

Cryostats & Low Temperature Circulators

Glass Capillary Viscometers

Low Temperature Viscosity Standards

TLV25 Viscometer Bath Low Temperature

Item Unit TV12LT

Ordering code:
230V/50Hz 00T0410
115V/60Hz 00T0415
230V/60Hz 00T0420

Range -40..20°C/-40..68°F
Reading °C or °F menu selectable
Interface RS232
Setting ± [°C/F] 0.01
Stability  [°K] std dev 0.004
min/max ±0.014
Uniformity [°K] std dev 0.004
min/max ±0.013
Heating [W] 500 + 700
Heaters 2
Bath volume [L] 15
Number of lids 1 lid with 4 x round diameter 51mm
Window [mm] 246 x 268
Opening bath [mm] 248*73
Depth [mm] 300
Length [mm] 740
Width [mm] 425
Height [mm] 720
Weight [kg] 65
Power [Watt] Minimum 200
Nominal 800
Maximum 2100
CE: All models conform to CE regulations

Depth [mm] 300
Length [mm] 740
Width [mm] 425
Height [mm] 720
Weight [kg] 65

Cryostats & Low Temperature Circulators

Glass Capillary Viscometers

Low Temperature Viscosity Standards

TLV25 Viscometer Bath Low Temperature

General

Tamson viscometer and Tamson calibration baths are specially designed for tests that require ultra precise temperature control, or processes that need to be followed visually, e.g. viscometry (conforms to ASTM 445, IP71-1), thermometer and sensor calibration, density and reaction rate measurement, etc.
The bath is fitted with a double window of which the front pane is detachable for cleaning purposes. The window is heated preventing built up of condensate.

Construction

The stainless steel construction ensures exceptionally stable temperatures which is further improved by an ingenius stirring mechanism with baffle plates. All wetted parts are made of stainless steel and PTFE, providing resistance against all usual bath fluids. The bath is fitted with adjustable feet for leveling.The cover of the bath has 4 round 51 mm holes with lids, for suspending glass capillary viscometers in holders. The use of themo insulated windows and window heating ensures clean sight. A permanent LED light is located in the top plate to supply clear light and guarantee optimal visibility inside the bath. A bath overflow outlet protects against expanding bath oil when the bath media is too high.

Agitation

A vane type stirrer with maintenace free bearings moves the bath fluid past a special heater

Span

All baths can be operated from -40 up to 20°C (-40..68°F).

Safety

The bath conforms to CE-regulations. Further the bath is equipped with a mechanical over temperature device which trips when in case of malfunction the bath exceeds the preset maximum temperature. This feature guarantees safe around the clock operation.

Accuracy

The system overall accuracy is within ± 0.005°K
Fine adjustment and offset
After the bath has stabilised the set point may be more accurately adjusted in the range of –5.00° to + 5.00°, if necessary.

Options
- Optical Level indicator 07T0080

Item Unit TV12LT

Ordering code:
230V/50Hz 00T0410
115V/60Hz 00T0415
230V/60Hz 00T0420

Range -40..20°C/-40..68°F
Reading °C or °F menu selectable
Interface RS232
Setting ± [°C/F] 0.01
Stability  [°K] std dev 0.004
min/max ±0.014
Uniformity [°K] std dev 0.004
min/max ±0.013
Heating [W] 500 + 700
Heaters 2
Bath volume [L] 15
Number of lids 1 lid with 4 x round diameter 51mm
Window [mm] 246 x 268
Opening bath [mm] 248*73
Depth [mm] 300
Length [mm] 740
Width [mm] 425
Height [mm] 720
Weight [kg] 65
Power [Watt] Minimum 200
Nominal 800
Maximum 2100
CE: All models conform to CE regulations

Depth [mm] 300
Length [mm] 740
Width [mm] 425
Height [mm] 720
Weight [kg] 65

Cryostats & Low Temperature Circulators

Glass Capillary Viscometers

Low Temperature Viscosity Standards

TLV25 Viscometer Bath Low Temperature

General

Tamson viscometer and Tamson calibration baths are specially designed for tests that require ultra precise temperature control, or processes that need to be followed visually, e.g. viscometry (conforms to ASTM 445, IP71-1), thermometer and sensor calibration, density and reaction rate measurement, etc.
The bath is fitted with a double window of which the front pane is detachable for cleaning purposes. The window is heated preventing built up of condensate.

Construction

The stainless steel construction ensures exceptionally stable temperatures which is further improved by an ingenius stirring mechanism with baffle plates. All wetted parts are made of stainless steel and PTFE, providing resistance against all usual bath fluids. The bath is fitted with adjustable feet for leveling.The cover of the bath has 4 round 51 mm holes with lids, for suspending glass capillary viscometers in holders. The use of themo insulated windows and window heating ensures clean sight. A permanent LED light is located in the top plate to supply clear light and guarantee optimal visibility inside the bath. A bath overflow outlet protects against expanding bath oil when the bath media is too high.

Agitation

A vane type stirrer with maintenace free bearings moves the bath fluid past a special heater

Span

All baths can be operated from -40 up to +80°C (-40..176°F).

Safety

The bath conforms to CE-regulations. Further the bath is equipped with a mechanical over temperature device which trips when in case of malfunction the bath exceeds the preset maximum temperature. This feature guarantees safe around the clock operation.

Accuracy

The system overall accuracy is within ± 0.005°K
Fine adjustment and offset
After the bath has stabilised the set point may be more accurately adjusted in the range of –5.00° to + 5.00°, if necessary.

Options
- Optical Level indicator 07T0080

Item Unit TV12LT

Range -40..+80°C/-40..176°F
Reading °C or °F menu selectable
Interface RS232
Setting ± [°C/F] 0.01
Stability  [°K] std dev 0.004
min/max ±0.014
Uniformity [°K] std dev 0.004
min/max ±0.013
Heating [W] 500 + 700
Heaters 2
Bath volume [L] 15
Number of lids 1 lid with 4 x round diameter 51mm
Window [mm] 246 x 268
Opening bath [mm] 248*73
Depth [mm] 300
Length [mm] 740
Width [mm] 425
Height [mm] 720
Weight [kg] 65
Power [Watt] Minimum 200
Nominal 800
Maximum 2100
CE: All models conform to CE regulations

Depth [mm] 300
Length [mm] 740
Width [mm] 425
Height [mm] 720
Weight [kg] 65

Cryostats & Low Temperature Circulators

Glass Capillary Viscometers

Low Temperature Viscosity Standards

TLV25 Viscometer Bath Low Temperature

General

Tamson viscometer and Tamson calibration baths are specially designed for tests that require ultra precise temperature control, or processes that need to be followed visually, e.g. viscometry (conforms to ASTM 445, IP71-1), thermometer and sensor calibration, density and reaction rate measurement, etc.
The bath is fitted with a double window of which the front pane is detachable for cleaning purposes. The window is heated preventing built up of condensate.

Construction

The stainless steel construction ensures exceptionally stable temperatures which is further improved by an ingenius stirring mechanism with baffle plates. All wetted parts are made of stainless steel and PTFE, providing resistance against all usual bath fluids. The bath is fitted with adjustable feet for leveling.The cover of the bath has 4 round 51 mm holes with lids, for suspending glass capillary viscometers in holders. The use of themo insulated windows and window heating ensures clean sight. A permanent LED light is located in the top plate to supply clear light and guarantee optimal visibility inside the bath. A bath overflow outlet protects against expanding bath oil when the bath media is too high.

Agitation

A vane type stirrer with maintenace free bearings moves the bath fluid past a special heater

Span

All baths can be operated from -40 up to +80°C (-40..176°F).

Safety

The bath conforms to CE-regulations. Further the bath is equipped with a mechanical over temperature device which trips when in case of malfunction the bath exceeds the preset maximum temperature. This feature guarantees safe around the clock operation.

Accuracy

The system overall accuracy is within ± 0.005°K
Fine adjustment and offset
After the bath has stabilised the set point may be more accurately adjusted in the range of –5.00° to + 5.00°, if necessary.

Options
- Optical Level indicator 07T0080

Item Unit TV12LT

Range -40..+80°C/-40..176°F
Reading °C or °F menu selectable
Interface RS232
Setting ± [°C/F] 0.01
Stability  [°K] std dev 0.004
min/max ±0.014
Uniformity [°K] std dev 0.004
min/max ±0.013
Heating [W] 500 + 700
Heaters 2
Bath volume [L] 15
Number of lids 1 lid with 4 x round diameter 51mm
Window [mm] 246 x 268
Opening bath [mm] 248*73
Depth [mm] 300
Length [mm] 740
Width [mm] 425
Height [mm] 720
Weight [kg] 65
Power [Watt] Minimum 200
Nominal 800
Maximum 2100
CE: All models conform to CE regulations

Depth [mm] 300
Length [mm] 740
Width [mm] 425
Height [mm] 720
Weight [kg] 65

Cryostats & Low Temperature Circulators

Glass Capillary Viscometers

Low Temperature Viscosity Standards

TLV25 Viscometer Bath Low Temperature

General

Tamson viscometer and Tamson calibration baths are specially designed for tests that require ultra precise temperature control, or processes that need to be followed visually, e.g. viscometry (conforms to ASTM 445, IP71-1), thermometer and sensor calibration, density and reaction rate measurement, etc.
The bath is fitted with a double window of which the front pane is detachable for cleaning purposes. The window is heated preventing built up of condensate.

Construction

The stainless steel construction ensures exceptionally stable temperatures which is further improved by an ingenius stirring mechanism with baffle plates. All wetted parts are made of stainless steel and PTFE, providing resistance against all usual bath fluids. The bath is fitted with adjustable feet for leveling.The cover of the bath has 4 round 51 mm holes with lids, for suspending glass capillary viscometers in holders. The use of themo insulated windows and window heating ensures clean sight. A permanent LED light is located in the top plate to supply clear light and guarantee optimal visibility inside the bath. A bath overflow outlet protects against expanding bath oil when the bath media is too high.

Agitation

A vane type stirrer with maintenace free bearings moves the bath fluid past a special heater

Span

All baths can be operated from -40 up to +80°C (-40..176°F).

Safety

The bath conforms to CE-regulations. Further the bath is equipped with a mechanical over temperature device which trips when in case of malfunction the bath exceeds the preset maximum temperature. This feature guarantees safe around the clock operation.

Accuracy

The system overall accuracy is within ± 0.005°K
Fine adjustment and offset
After the bath has stabilised the set point may be more accurately adjusted in the range of –5.00° to + 5.00°, if necessary.

Options
- Optical Level indicator 07T0080

Item Unit TV12LT

Range -40..+80°C/-40..176°F
Reading °C or °F menu selectable
Interface RS232
Setting ± [°C/F] 0.01
Stability  [°K] std dev 0.004
min/max ±0.014
Uniformity [°K] std dev 0.004
min/max ±0.013
Heating [W] 500 + 700
Heaters 2
Bath volume [L] 15
Number of lids 1 lid with 4 x round diameter 51mm
Window [mm] 246 x 268
Opening bath [mm] 248*73
Depth [mm] 300
Length [mm] 740
Width [mm] 425
Height [mm] 720
Weight [kg] 65
Power [Watt] Minimum 200
Nominal 800
Maximum 2100
CE: All models conform to CE regulations

Depth [mm] 300
Length [mm] 740
Width [mm] 425
Height [mm] 720
Weight [kg] 65

Cryostats & Low Temperature Circulators

Glass Capillary Viscometers

Low Temperature Viscosity Standards

TLV25 Viscometer Bath Low Temperature

General

Tamson viscometer and Tamson calibration baths are specially designed for tests that require ultra precise temperature control, or processes that need to be followed visually, e.g. viscometry (conforms to ASTM 445, IP71-1), thermometer and sensor calibration, density and reaction rate measurement, etc.
The bath is fitted with a double window of which the front pane is detachable for cleaning purposes. The window is heated preventing built up of condensate.

Construction

The stainless steel construction ensures exceptionally stable temperatures which is further improved by an ingenius stirring mechanism with baffle plates. All wetted parts are made of stainless steel and PTFE, providing resistance against all usual bath fluids. The bath is fitted with adjustable feet for leveling.The cover of the bath has 4 round 51 mm holes with lids, for suspending glass capillary viscometers in holders. The use of themo insulated windows and window heating ensures clean sight. A permanent LED light is located in the top plate to supply clear light and guarantee optimal visibility inside the bath. A bath overflow outlet protects against expanding bath oil when the bath media is too high.

Agitation

A vane type stirrer with maintenace free bearings moves the bath fluid past a special heater

Span

All baths can be operated from -50 up to +20°C (-58..68°F).

Safety

The bath conforms to CE-regulations. Further the bath is equipped with a mechanical over temperature device which trips when in case of malfunction the bath exceeds the preset maximum temperature. This feature guarantees safe around the clock operation.

Accuracy

The system overall accuracy is within ± 0.005°K
Fine adjustment and offset
After the bath has stabilised the set point may be more accurately adjusted in the range of –5.00° to + 5.00°, if necessary.

Options
- Optical Level indicator 07T0080

Item Unit TV12LT

Range -50..+20°C/-58..68°F
Reading °C or °F menu selectable
Interface RS232
Setting ± [°C/F] 0.01
Stability  [°K] std dev 0.004
min/max ±0.014
Uniformity [°K] std dev 0.004
min/max ±0.013
Heating [W] 500 + 700
Heaters 2
Bath volume [L] 15
Number of lids 1 lid with 4 x round diameter 51mm
Window [mm] 246 x 268
Opening bath [mm] 248*73
Depth [mm] 300
Length [mm] 740
Width [mm] 425
Height [mm] 720
Weight [kg] 65
Power [Watt] Minimum 200
Nominal 800
Maximum 2100
CE: All models conform to CE regulations

Depth [mm] 300
Length [mm] 740
Width [mm] 425
Height [mm] 720
Weight [kg] 65

Cryostats & Low Temperature Circulators

Glass Capillary Viscometers

Low Temperature Viscosity Standards

TLV25 Viscometer Bath Low Temperature

General

Tamson viscometer and Tamson calibration baths are specially designed for tests that require ultra precise temperature control, or processes that need to be followed visually, e.g. viscometry (conforms to ASTM 445, IP71-1), thermometer and sensor calibration, density and reaction rate measurement, etc.
The bath is fitted with a double window of which the front pane is detachable for cleaning purposes. The window is heated preventing built up of condensate.

Construction

The stainless steel construction ensures exceptionally stable temperatures which is further improved by an ingenius stirring mechanism with baffle plates. All wetted parts are made of stainless steel and PTFE, providing resistance against all usual bath fluids. The bath is fitted with adjustable feet for leveling.The cover of the bath has 4 round 51 mm holes with lids, for suspending glass capillary viscometers in holders. The use of themo insulated windows and window heating ensures clean sight. A permanent LED light is located in the top plate to supply clear light and guarantee optimal visibility inside the bath. A bath overflow outlet protects against expanding bath oil when the bath media is too high.

Agitation

A vane type stirrer with maintenace free bearings moves the bath fluid past a special heater

Span

All baths can be operated from -50 up to +20°C (-58..68°F).

Safety

The bath conforms to CE-regulations. Further the bath is equipped with a mechanical over temperature device which trips when in case of malfunction the bath exceeds the preset maximum temperature. This feature guarantees safe around the clock operation.

Accuracy

The system overall accuracy is within ± 0.005°K
Fine adjustment and offset
After the bath has stabilised the set point may be more accurately adjusted in the range of –5.00° to + 5.00°, if necessary.

Options
- Optical Level indicator 07T0080

Item Unit TV12LT

Range -50..+20°C/-58..68°F
Reading °C or °F menu selectable
Interface RS232
Setting ± [°C/F] 0.01
Stability  [°K] std dev 0.004
min/max ±0.014
Uniformity [°K] std dev 0.004
min/max ±0.013
Heating [W] 500 + 700
Heaters 2
Bath volume [L] 15
Number of lids 1 lid with 4 x round diameter 51mm
Window [mm] 246 x 268
Opening bath [mm] 248*73
Depth [mm] 300
Length [mm] 740
Width [mm] 425
Height [mm] 720
Weight [kg] 65
Power [Watt] Minimum 200
Nominal 800
Maximum 2100
CE: All models conform to CE regulations

Depth [mm] 300
Length [mm] 740
Width [mm] 425
Height [mm] 720
Weight [kg] 65

Cryostats & Low Temperature Circulators

Glass Capillary Viscometers

Low Temperature Viscosity Standards

TLV25 Viscometer Bath Low Temperature

General

Tamson viscometer and Tamson calibration baths are specially designed for tests that require ultra precise temperature control, or processes that need to be followed visually, e.g. viscometry (conforms to ASTM 445, IP71-1), thermometer and sensor calibration, density and reaction rate measurement, etc.
The bath is fitted with a double window of which the front pane is detachable for cleaning purposes. The window is heated preventing built up of condensate.

Construction

The stainless steel construction ensures exceptionally stable temperatures which is further improved by an ingenius stirring mechanism with baffle plates. All wetted parts are made of stainless steel and PTFE, providing resistance against all usual bath fluids. The bath is fitted with adjustable feet for leveling.The cover of the bath has 4 round 51 mm holes with lids, for suspending glass capillary viscometers in holders. The use of themo insulated windows and window heating ensures clean sight. A permanent LED light is located in the top plate to supply clear light and guarantee optimal visibility inside the bath. A bath overflow outlet protects against expanding bath oil when the bath media is too high.

Agitation

A vane type stirrer with maintenace free bearings moves the bath fluid past a special heater

Span

All baths can be operated from -50 up to +20°C (-58..68°F).

Safety

The bath conforms to CE-regulations. Further the bath is equipped with a mechanical over temperature device which trips when in case of malfunction the bath exceeds the preset maximum temperature. This feature guarantees safe around the clock operation.

Accuracy

The system overall accuracy is within ± 0.005°K
Fine adjustment and offset
After the bath has stabilised the set point may be more accurately adjusted in the range of –5.00° to + 5.00°, if necessary.

Options
- Optical Level indicator 07T0080

Item Unit TV12LT

Range -50..+20°C/-58..68°F
Reading °C or °F menu selectable
Interface RS232
Setting ± [°C/F] 0.01
Stability  [°K] std dev 0.004
min/max ±0.014
Uniformity [°K] std dev 0.004
min/max ±0.013
Heating [W] 500 + 700
Heaters 2
Bath volume [L] 15
Number of lids 1 lid with 4 x round diameter 51mm
Window [mm] 246 x 268
Opening bath [mm] 248*73
Depth [mm] 300
Length [mm] 740
Width [mm] 425
Height [mm] 720
Weight [kg] 65
Power [Watt] Minimum 200
Nominal 800
Maximum 2100
CE: All models conform to CE regulations

Depth [mm] 300
Length [mm] 740
Width [mm] 425
Height [mm] 720
Weight [kg] 65

Cryostats & Low Temperature Circulators

Glass Capillary Viscometers

Low Temperature Viscosity Standards

TLV25 Viscometer Bath Low Temperature