Setaflash Series 3 Plus Closed Cup Flash Point Tester-Auto Ramp


Part No. 33000-0

POA
OR

Quick Overview

Setaflash Series 3 Plus Closed Cup Flash Point Tester-Auto Ramp

PDF Downloads

Setaflash Series 3 Plus Closed Cup Flash Point Tester-Auto Ramp

More Views

  • Setaflash Series 3 Plus Closed Cup Flash Point Tester-Auto Ramp

Product Description

The Setaflash Series 3 Plus Closed Cup Flash Point Tester is an easy to use instrument that can complete a flash/no-flash test in less than two minutes, or determine the flash point of a sample within a temperature range of 0° to 300°C.

ADDITIONAL INFORMATION

All functions on the Series 3 flash point tester are accessed via a two button keypad and the Seta Multifunctional And Rotational Test (SMART) control feature. The digital display shows test parameters, instrument status, and the test result. An audible prompt is sounded when an action is required from the operator. An automatic flash detector reduces the chance of misinterpretation of the test result by the operator, and enhances repeatability.

Gas for the test jet/shutter assembly is supplied from an integral gas tank, which is filled using a standard butane (lighter) refill cartridge. The instrument is lightweight and suitable for mobile use when operated from the optional 12 volt power supply adaptor.

The temperature ramp mode allows rapid determination of the flash point of a sample. The cup is heated at a rate of 2°C per minute from the start temperature. An audible prompt to carry out a flash test occurs every 1°C rise up to 100°C, every 2°C rise over 100°C. If no flash is detected when the temperature reaches 40°C above the start temperature, the flash tester automatically terminates the test.

Supplied with: 2ml syringe, ignitor, mains lead, and instruction manual.

SPECIFICATIONS

  Description
Temperature range Ambient to 300°C (0° to 300°C with 13870-0)
Cup material Aluminium
Test modes Rapid Equilibrium and Ramp
Sample size 2ml for flash points up to 100°C 4ml for flash points above 100°C
Test duration, Rapid Equilibrium Mode 1 minute below 100°C, 2 minutes above 100°C, or user determined 1 to 99 minutes
Ramp rate 2°C/min ramp
Heating and Cooling systems Cartridge heater
Power 200W (maximum)
Voltage 110/120V or 220/240V, 50/60Hz (switchable) 12Vdc with optional adaptor
Gas Supply Laboratory gas, 3kPa (0.44psi) maximum pressure or Butane from optional Portable Gas Tank 13667-0
Size (HxWxD) 26 x 28 x 26cm
Weight 4 kg
CCCN Code: Tariff 90268020

 

FEATURES

  • Flash point test in less than 2 minutes
  • Small sample size - 2 or 4ml
  • Automatic flash detection
  • Audible and on-screen prompts
  • Cost effective
  • Portable operation
  • Simple calibration
  • Temperature ramp function


METHODS

ASTM D1655, ASTM D3278, ASTM D3828, ASTM D7236, ASTM E502, BS 3900 Part A13, BS 6664 Parts 3 & 4, BS EN 456, CHIPS Regulations, Classification of Dangerous Goods for Carriage: Viscous and Non-viscous Liquids, DEF STAN 91-91, EPA 1020 A & B, IP 523, IP 524, IP 534, ISO 3679, ISO 3680, UN Class 3 Non-viscous Flammable Liquids

DETAILS OF METHODS

Method Description
CHIPS Regulations Chemicals Hazard Information and Packaging for Supply
Classification of Dangerous Goods for Carriage: Viscous and Non-viscous Liquids The Multiflash-SS fully automates and conforms precisely to national and international Small Scale Closed Cup standard test methods.
EPA 1020 A & B Setaflash Closed-Cup Method for determining ignitability
ASTM D3828 Standard Test Methods for Flash Point by Small Scale Closed Tester
ASTM D3278 Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus - The test methods are applicable to paints, enamels, lacquers, varnishes, and related products having a flash point between 0 and 110°C (32 and 230°F) and Viscosity lower than 150 St at 25°C (77°F).
BS EN 456 Method for determination of flashpoint of paints, varnishes and related products by the rapid equilibrium method
ISO 3680 Methods of test for paints. Tests on liquid paints (excluding chemical tests). Test for flash/no flash (rapid equilibrium method)
UN Class 3 Non-viscous Flammable Liquids Small scale flash point testers are universally specified in many international regulations to define and classify "flammable" and "combustible" substances.
ASTM E502 Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods
ISO 3679 Determination of flash point. Rapid equilibrium closed cup method
BS 6664 Parts 3 & 4 Methods of test for paints. Tests on liquid paints (excluding chemical tests). Test for flash/no flash (closed cup equilibrium method)
BS 3900 Part A13 Test for flash/no flash (rapid equilibrium method)
IP 523 Determination of flash point. Rapid equilibrium closed cup method
IP 524 Methods of test for paints. Tests on liquid paints (excluding chemical tests). Test for flash/no flash (rapid equilibrium method)
ASTM D7236 Flash Point by Small Scale Closed Cup Ramp Method
IP 534 Flash Point by Small Scale Closed Cup Ramp Method
ASTM D1655 Small Scale Flashpoint
DEF STAN 91-91 Aviaton Fuel Specification

Additional Information

Country of ManufactureUnited Kingdom
Dimensions cm (WxDxH)(HxWxD): 26 x 28 x 26cm
Hazardous Product?No
ManufacturerStanhope Seta
Tarriff Code90268020
Gross Weight (Kg)4.9500