General Purpose Viscosity Reference Standards

Paragon ISO 17025 / ISO Guide 34 certified viscosity standards are for the calibration and verification of glass capillary viscometers and other viscosity measuring equipment where operating temperature is controlled precisely. 

At Paragon Scientific we understand the importance of accurate calibration in your laboratory so we only source the highest quality raw materials for use in the manufacture of all our Viscosity Standards. Using only the best quality materials means that our standards are very stable in all environments, you will not experience flocking (associated with cool environments), discolouration or sedimentation.

We fully test our products at every given data point, so you can be assured that the certified value given is the most accurate available. There are no exceptions or disclaimers on our test certificates and labels, what you see is EXACTLY what you get.

Paragon Scientific Viscosity Standards are certified to BS/EN/IEC/ISO 17025 /ISO Guide 34, accredited by UKAS, and are manufactured and tested in accordance with the primary method for viscosity determination which references the value of water as 1.0034 mm2/s (cSt) at 20°C(1.0016 mPa·s (cP) at 20°C.)

What is meant by  UKAS
The United Kingdom Accreditation Service (UKAS) is the sole accreditation body recognised by the UK government to assess, against internationally recognised standards, organisations that provide certification, testing, inspection and calibration services. Accreditation by UKAS demonstrates the competence, impartiality and sustainable performance of these evaluators

What is BS/EN/ISO/IEC 17025
ISO 17025 is a recognised international standard that specifies the requirements for the competence to carry out testing and or calibrations to a standard dictated by international methods. The international standard requires that an accredited facility comply with all the requirements detailed within the varied sections of the standard. These sections range from assuring the quality of test and calibration results to accommodation, environmental conditions, and purchasing.

ISO17025 is applicable to laboratories that operate in a  multitude of business sectors, some of which include automotive, cosmetics, micro-electronics, petro-chemical, pharmaceutical and power generation.

What is ISO Guide 34
ISO Guide 34 provides the highest level of Quality Assurance, confirming the expertise of the manufacturer, the integrity of the production systems and the reliability of the Certified Reference Materials that it produces.

• Certified according to ISO 17025 / ISO Guide 34 under UKAS accreditation
• Manufactured in accordance with ASTM D 2162 (Standard Practice for basic calibration of master viscometers and viscosity standard oils)
• Density g/mL in accordance with ASTM D 1480
• Kinematic (cSt) & dynamic viscosity (mPa·s) given at all temperatures
• Standard Pack Size 500ml, available also in 5L, 10L, 20L 
• Fully traceable to National Standards
• Ensures full compliance to ASTM & IP test method protocol
• Tamper evident security packaging
• 2 Year shelf  life
• Manufactured in the United Kingdom

This product is classified as hazardous to ship and therfore incurs additional charges in order to meet IATA/ADR/IMDG regulations. UN 1208, Pkg Gp II, Hazard Class 3

Capillary Viscometer Recalibration

Custom Blending

Glass Capillary Viscometers

Thermostatic Baths & Circulators

Viscometer Holders & Hangers

Viscosity Baths

Viscosity Standards

Viscosity Testing Accessories

Paragon ISO 17025 / ISO Guide 34 certified viscosity standards are for the calibration and verification of glass capillary viscometers and other viscosity measuring equipment where operating temperature is controlled precisely. 

At Paragon Scientific we understand the importance of accurate calibration in your laboratory so we only source the highest quality raw materials for use in the manufacture of all our Viscosity Standards. Using only the best quality materials means that our standards are very stable in all environments, you will not experience flocking (associated with cool environments), discolouration or sedimentation.

We fully test our products at every given data point, so you can be assured that the certified value given is the most accurate available. There are no exceptions or disclaimers on our test certificates and labels, what you see is EXACTLY what you get.

Paragon Scientific Viscosity Standards are certified to BS/EN/IEC/ISO 17025 /ISO Guide 34, accredited by UKAS, and are manufactured and tested in accordance with the primary method for viscosity determination which references the value of water as 1.0034 mm2/s (cSt) at 20°C(1.0016 mPa·s (cP) at 20°C.)

What is meant by  UKAS
The United Kingdom Accreditation Service (UKAS) is the sole accreditation body recognised by the UK government to assess, against internationally recognised standards, organisations that provide certification, testing, inspection and calibration services. Accreditation by UKAS demonstrates the competence, impartiality and sustainable performance of these evaluators

What is BS/EN/ISO/IEC 17025
ISO 17025 is a recognised international standard that specifies the requirements for the competence to carry out testing and or calibrations to a standard dictated by international methods. The international standard requires that an accredited facility comply with all the requirements detailed within the varied sections of the standard. These sections range from assuring the quality of test and calibration results to accommodation, environmental conditions, and purchasing.

ISO17025 is applicable to laboratories that operate in a  multitude of business sectors, some of which include automotive, cosmetics, micro-electronics, petro-chemical, pharmaceutical and power generation.

What is ISO Guide 34
ISO Guide 34 provides the highest level of Quality Assurance, confirming the expertise of the manufacturer, the integrity of the production systems and the reliability of the Certified Reference Materials that it produces.

• Certified according to ISO 17025 / ISO Guide 34 under UKAS accreditation
• Manufactured in accordance with ASTM D 2162 (Standard Practice for basic calibration of master viscometers and viscosity standard oils)
• Density g/mL in accordance with ASTM D 1480
• Kinematic (cSt) & dynamic viscosity (mPa·s) given at all temperatures
• Standard Pack Size 500ml, available also in 5L, 10L, 20L 
• Fully traceable to National Standards
• Ensures full compliance to ASTM & IP test method protocol
• Tamper evident security packaging
• 2 Year shelf  life
• Manufactured in the United Kingdom

This product is classified as hazardous to ship and therfore incurs additional charges in order to meet IATA/ADR/IMDG regulations. UN 1268, Pkg Gp II, Hazard Class 3
(Tariff Number 27.10.19.99)

Capillary Viscometer Recalibration

Custom Blending

Glass Capillary Viscometers

Thermostatic Baths & Circulators

Viscometer Holders & Hangers

Viscosity Baths

Viscosity Standards

Viscosity Testing Accessories

Paragon ISO 17025 / ISO Guide 34 certified viscosity standards are for the calibration and verification of glass capillary viscometers and other viscosity measuring equipment where operating temperature is controlled precisely. At Paragon Scientific we understand the importance of accurate calibration in your laboratory so we only source the highest quality raw materials for use in the manufacture of all our Viscosity Standards. Using only the best quality materials means that our standards are very stable in all environments, you will not experience 'flocking' (associated with cool environments), discolouration or sedimentation.

We fully test our products at every given data point, so you can be assured that the certified value given is the most accurate available. There are no exceptions or disclaimers on our test certificates and labels, what you see is EXACTLY what you get.

Paragon Scientific Viscosity Standards are certified to BS/EN/IEC/ISO 17025 /ISO Guide 34, accredited by UKAS, and are manufactured and tested in accordance with the primary method for viscosity determination which references the value of water as 1.0034 mm2/s (cSt) at 20°C(1.0016 mPa·s (cP) at 20°C.)

What is meant by  UKAS
The United Kingdom Accreditation Service (UKAS) is the sole accreditation body recognised by the UK government to assess, against internationally recognised standards, organisations that provide certification, testing, inspection and calibration services. Accreditation by UKAS demonstrates the competence, impartiality and sustainable performance of these evaluators

What is BS/EN/ISO/IEC 17025
ISO 17025 is a recognised international standard that specifies the requirements for the competence to carry out testing and or calibrations to a standard dictated by international methods. The international standard requires that an accredited facility comply with all the requirements detailed within the varied sections of the standard. These sections range from assuring the quality of test and calibration results to accommodation, environmental conditions, and purchasing.

ISO17025 is applicable to laboratories that operate in a  multitude of business sectors, some of which include automotive, cosmetics, micro-electronics, petro-chemical, pharmaceutical and power generation.

What is ISO Guide 34
ISO Guide 34 provides the highest level of Quality Assurance, confirming the expertise of the manufacturer, the integrity of the production systems and the reliability of the Certified Reference Materials that it produces.

• Certified according to ISO 17025 / ISO Guide 34 under UKAS accreditation
• Manufactured in accordance with ASTM D 2162 (Standard Practice for basic calibration of master viscometers and viscosity standard oils)
• Density g/mL in accordance with ASTM D 1480
• Kinematic (cSt) & dynamic viscosity (mPa·s) given at all temperatures
• Standard Pack Size 500ml, available also in 5L, 10L, 20L 
• Fully traceable to National Standards
• Ensures full compliance to ASTM & IP test method protocol
• Tamper evident security packaging
• 2 Year shelf  life
• Manufactured in the United Kingdom

This product is classified as hazardous to ship and therfore incurs additional charges in order to meet IATA/ADR/IMDG regulations. UN 1300, Pkg Gp III, Hazard Class 3
 (Tariff Number 27.10.19.99)

Capillary Viscometer Recalibration

Custom Blending

Glass Capillary Viscometers

Thermostatic Baths & Circulators

Viscometer Holders & Hangers

Viscosity Baths

Viscosity Standards

Viscosity Testing Accessories

Paragon ISO 17025 / ISO Guide 34 certified viscosity standards are for the calibration and verification of glass capillary viscometers and other viscosity measuring equipment where operating temperature is controlled precisely. At Paragon Scientific we understand the importance of accurate calibration in your laboratory so we only source the highest quality raw materials for use in the manufacture of all our Viscosity Standards. Using only the best quality materials means that our standards are very stable in all environments, you will not experience 'flocking' (associated with cool environments), discolouration or sedimentation.

We fully test our products at every given data point, so you can be assured that the certified value given is the most accurate available. There are no exceptions or disclaimers on our test certificates and labels, what you see is EXACTLY what you get.

Paragon Scientific Viscosity Standards are certified to BS/EN/IEC/ISO 17025

/ISO Guide 34, accredited by UKAS, and are manufactured and tested in accordance with the primary method for viscosity determination which references the value of water as 1.0034 mm2/s (cSt) at 20°C(1.0016 mPa·s (cP) at 20°C.)

What is meant by  UKAS
The United Kingdom Accreditation Service (UKAS) is the sole accreditation body recognised by the UK government to assess, against internationally recognised standards, organisations that provide certification, testing, inspection and calibration services. Accreditation by UKAS demonstrates the competence, impartiality and sustainable performance of these evaluators

What is BS/EN/ISO/IEC 17025
ISO 17025 is a recognised international standard that specifies the requirements for the competence to carry out testing and or calibrations to a standard dictated by international methods. The international standard requires that an accredited facility comply with all the requirements detailed within the varied sections of the standard. These sections range from assuring the quality of test and calibration results to accommodation, environmental conditions, and purchasing.

ISO17025 is applicable to laboratories that operate in a  multitude of business sectors, some of which include automotive, cosmetics, micro-electronics, petro-chemical, pharmaceutical and power generation.

What is ISO Guide 34
ISO Guide 34 provides the highest level of Quality Assurance, confirming the expertise of the manufacturer, the integrity of the production systems and the reliability of the Certified Reference Materials that it produces.

• Certified according to ISO 17025 / ISO Guide 34 under UKAS accreditation
• Manufactured in accordance with ASTM D 2162 (Standard Practice for basic calibration of master viscometers and viscosity standard oils)
• Density g/mL in accordance with ASTM D 1480
• Kinematic (cSt) & dynamic viscosity (mPa·s) given at all temperatures
• Standard Pack Size 500ml, available also in 5L, 10L, 20L 
• Fully traceable to National Standards
• Ensures full compliance to ASTM & IP test method protocol
• Tamper evident security packaging
• 2 Year shelf  life
• Manufactured in the United Kingdom

This product is not classified as hazardous to ship.

(Tariff Number 27.10.19.99)

 

 

 

Capillary Viscometer Recalibration

Custom Blending

Glass Capillary Viscometers

Thermostatic Baths & Circulators

Viscometer Holders & Hangers

Viscosity Baths

Viscosity Standards

Viscosity Testing Accessories

Paragon ISO 17025 / ISO Guide 34 certified viscosity standards are for the calibration and verification of glass capillary viscometers and other viscosity measuring equipment where operating temperature is controlled precisely. At Paragon Scientific we understand the importance of accurate calibration in your laboratory so we only source the highest quality raw materials for use in the manufacture of all our Viscosity Standards. Using only the best quality materials means that our standards are very stable in all environments, you will not experience \'flocking\' (associated with cool environments), discolouration or sedimentation.

We fully test our products at every given data point, so you can be assured that the certified value given is the most accurate available. There are no exceptions or disclaimers on our test certificates and labels, what you see is EXACTLY what you get.

Paragon Scientific Viscosity Standards are certified to BS/EN/IEC/ISO 17025 / ISO Guide 34, accredited by UKAS, and are manufactured and tested in accordance with the primary method for viscosity determination which references the value of water as 1.0034 mm2/s (cSt) at 20°C(1.0016 mPa·s (cP) at 20°C.)

What is meant by  UKAS
The United Kingdom Accreditation Service (UKAS) is the sole accreditation body recognised by the UK government to assess, against internationally recognised standards, organisations that provide certification, testing, inspection and calibration services. Accreditation by UKAS demonstrates the competence, impartiality and sustainable performance of these evaluators

What is BS/EN/ISO/IEC 17025
ISO 17025 is a recognised international standard that specifies the requirements for the competence to carry out testing and or calibrations to a standard dictated by international methods. The international standard requires that an accredited facility comply with all the requirements detailed within the varied sections of the standard. These sections range from assuring the quality of test and calibration results to accommodation, environmental conditions, and purchasing.

ISO17025 is applicable to laboratories that operate in a  multitude of business sectors, some of which include automotive, cosmetics, micro-electronics, petro-chemical, pharmaceutical and power generation.

What is ISO Guide 34
ISO Guide 34 provides the highest level of Quality Assurance, confirming the expertise of the manufacturer, the integrity of the production systems and the reliability of the Certified Reference Materials that it produces.

• Certified according to ISO 17025 / ISO Guide 34 under UKAS accreditation
• Manufactured in accordance with ASTM D 2162 (Standard Practice for basic calibration of master viscometers and viscosity standard oils)
• Density g/mL in accordance with ASTM D 1480
• Kinematic (cSt) & dynamic viscosity (mPa·s) given at all temperatures
• Standard Pack Size 500ml, available also in 5L, 10L, 20L 
• Fully traceable to National Standards
• Ensures full compliance to ASTM & IP test method protocol
• Tamper evident security packaging
• 2 Year shelf  life
• Manufactured in the United Kingdom

This product is not classified as hazardous to ship.

(Tariff Number 27.10.19.99)

Capillary Viscometer Recalibration

Custom Blending

Glass Capillary Viscometers

Thermostatic Baths & Circulators

Viscometer Holders & Hangers

Viscosity Baths

Viscosity Standards

Viscosity Testing Accessories

For the calibration and verification of glass capillary viscometers and other viscosity measuring equipment where operating temperature is controlled precisely. At Paragon Scientific we understand the importance of accurate calibration in your laboratory so we only source the highest quality raw materials for use in the manufacture of all our Viscosity Standards. Using only the best quality materials means that our standards are very stable in all environments, you will not experience 'flocking' (associated with cool environments), discolouration or sedimentation.

We fully test our products at every given data point, so you can be assured that the certified value given is the most accurate available. There are no exceptions or disclaimers on our test certificates and labels, what you see is EXACTLY what you get.

Paragon Scientific Viscosity Standards are certified to BS/EN/IEC/ISO 17025 /ISO Guide 34, accredited by UKAS, and are manufactured and tested in accordance with the primary method for viscosity determination which references the value of water as 1.0034 mm2/s (cSt) at 20°C(1.0016 mPa·s (cP) at 20°C.)

What is meant by  UKAS
The United Kingdom Accreditation Service (UKAS) is the sole accreditation body recognised by the UK government to assess, against internationally recognised standards, organisations that provide certification, testing, inspection and calibration services. Accreditation by UKAS demonstrates the competence, impartiality and sustainable performance of these evaluators

What is BS/EN/ISO/IEC 17025
ISO 17025 is a recognised international standard that specifies the requirements for the competence to carry out testing and or calibrations to a standard dictated by international methods. The international standard requires that an accredited facility comply with all the requirements detailed within the varied sections of the standard. These sections range from assuring the quality of test and calibration results to accommodation, environmental conditions, and purchasing. ISO17025 is applicable to laboratories that operate in a  multitude of business sectors, some of which include automotive, cosmetics, micro-electronics, petro-chemical, pharmaceutical and power generation.

What is ISO Guide 34
ISO Guide 34 provides the highest level of Quality Assurance, confirming the expertise of the manufacturer, the integrity of the production systems and the reliability of the Certified Reference Materials that it produces.

• Manufactured in accordance with ASTM D 2162 (Standard Practice for basic calibration of master viscometers and viscosity standard oils)
• Density g/mL in accordance with ASTM D 1480
• Kinematic (cSt) & dynamic viscosity (mPa·s) given at all temperatures.
• Certified according to ISO 17025 / ISO Guide 34 under UKAS accreditation
• Standard Pack Size 500ml, available also in 5L, 10L, 20L 
• Fully traceable to National Standards
• Ensures full compliance to ASTM & IP test method protocol
• Tamper evident security packaging
• 2 Year shelf life
• Manufactured in the United Kingdom

This product is not classified as hazardous to ship.

(Tariff Number 27.10.19.99)

Capillary Viscometer Recalibration

Custom Blending

Glass Capillary Viscometers

Thermostatic Baths & Circulators

Viscometer Holders & Hangers

Viscosity Baths

Viscosity Standards

Viscosity Testing Accessories

Paragon ISO 17025 / ISO Guide 34 certified viscosity standards are for the calibration and verification of glass capillary viscometers and other viscosity measuring equipment where operating temperature is controlled precisely. At Paragon Scientific we understand the importance of accurate calibration in your laboratory so we only source the highest quality raw materials for use in the manufacture of all our Viscosity Standards. Using only the best quality materials means that our standards are very stable in all environments, you will not experience 'flocking' (associated with cool environments), discolouration or sedimentation.

We fully test our products at every given data point, so you can be assured that the certified value given is the most accurate available. There are no exceptions or disclaimers on our test certificates and labels, what you see is EXACTLY what you get.

Paragon Scientific Viscosity Standards are certified to BS/EN/IEC/ISO 17025

/ISO Guide 34, accredited by UKAS, and are manufactured and tested in accordance with the primary method for viscosity determination which references the value of water as 1.0034 mm2/s (cSt) at 20°C(1.0016 mPa·s (cP) at 20°C.)

What is meant by  UKAS
The United Kingdom Accreditation Service (UKAS) is the sole accreditation body recognised by the UK government to assess, against internationally recognised standards, organisations that provide certification, testing, inspection and calibration services. Accreditation by UKAS demonstrates the competence, impartiality and sustainable performance of these evaluators

What is BS/EN/ISO/IEC 17025
ISO 17025 is a recognised international standard that specifies the requirements for the competence to carry out testing and or calibrations to a standard dictated by international methods. The international standard requires that an accredited facility comply with all the requirements detailed within the varied sections of the standard. These sections range from assuring the quality of test and calibration results to accommodation, environmental conditions, and purchasing.

ISO17025 is applicable to laboratories that operate in a  multitude of business sectors, some of which include automotive, cosmetics, micro-electronics, petro-chemical, pharmaceutical and power generation.

What is ISO Guide 34
ISO Guide 34 provides the highest level of Quality Assurance, confirming the expertise of the manufacturer, the integrity of the production systems and the reliability of the Certified Reference Materials that it produces.

• Certified according to ISO 17025 / ISO Guide 34 under UKAS accreditation
• Manufactured in accordance with ASTM D 2162 (Standard Practice for basic calibration of master viscometers and viscosity standard oils)
• Density g/mL in accordance with ASTM D 1480
• Kinematic (cSt) & dynamic viscosity (mPa·s) given at all temperatures
• Standard Pack Size 500ml, available also in 5L, 10L, 20L 
• Fully traceable to National Standards
• Ensures full compliance to ASTM & IP test method protocol
• Tamper evident security packaging
• 2 Year shelf  life
• Manufactured in the United Kingdom

This product is not classified as hazardous to ship.

(Tariff Number 27.10.19.99)

Capillary Viscometer Recalibration

Custom Blending

Glass Capillary Viscometers

Thermostatic Baths & Circulators

Viscometer Holders & Hangers

Viscosity Baths

Viscosity Standards

Viscosity Testing Accessories

For the calibration and verification of glass capillary viscometers and other viscosity measuring equipment where operating temperature is controlled precisely. At Paragon Scientific we understand the importance of accurate calibration in your laboratory so we only source the highest quality raw materials for use in the manufacture of all our Viscosity Standards. Using only the best quality materials means that our standards are very stable in all environments, you will not experience 'flocking' (associated with cool environments), discolouration or sedimentation.

We fully test our products at every given data point, so you can be assured that the certified value given is the most accurate available. There are no exceptions or disclaimers on our test certificates and labels, what you see is EXACTLY what you get.

Paragon Scientific Viscosity Standards are certified to BS/EN/IEC/ISO 17025 / ISO Guide 34, accredited by UKAS, and are manufactured and tested in accordance with the primary method for viscosity determination which references the value of water as 1.0034 mm2/s (cSt) at 20°C(1.0016 mPa·s (cP) at 20°C.)

What is meant by  UKAS
The United Kingdom Accreditation Service (UKAS) is the sole accreditation body recognised by the UK government to assess, against internationally recognised standards, organisations that provide certification, testing, inspection and calibration services. Accreditation by UKAS demonstrates the competence, impartiality and sustainable performance of these evaluators

What is BS/EN/ISO/IEC 17025
ISO 17025 is a recognised international standard that specifies the requirements for the competence to carry out testing and or calibrations to a standard dictated by international methods. The international standard requires that an accredited facility comply with all the requirements detailed within the varied sections of the standard. These sections range from assuring the quality of test and calibration results to accommodation, environmental conditions, and purchasing. ISO17025 is applicable to laboratories that operate in a  multitude of business sectors, some of which include automotive, cosmetics, micro-electronics, petro-chemical, pharmaceutical and power generation.

What is ISO Guide 34
ISO Guide 34 provides the highest level of Quality Assurance, confirming the expertise of the manufacturer, the integrity of the production systems and the reliability of the Certified Reference Materials that it produces.

• Manufactured in accordance with ASTM D 2162 (Standard Practice for basic calibration of master viscometers and viscosity standard oils)
• Density g/mL in accordance with ASTM D 1480
• Kinematic (cSt) & dynamic viscosity (mPa·s) given at all temperatures
• Certified according to ISO 17025 / ISO Guide 34 under UKAS accreditation
• Standard Pack Size 500ml, available also in 5L, 10L, 20L 
• Fully traceable to National Standards
• Ensures full compliance to ASTM & IP test method protocol
• Tamper evident security packaging
• 2 Year shelf  life
• Manufactured in the United Kingdom

This product is not classified as hazardous to ship.

(Tariff Number 27.10.19.99)

Capillary Viscometer Recalibration

Custom Blending

Glass Capillary Viscometers

Thermostatic Baths & Circulators

Viscometer Holders & Hangers

Viscosity Baths

Viscosity Standards

Viscosity Testing Accessories

Paragon ISO 17025 / ISO Guide 34 certified viscosity standards are for the calibration and verification of glass capillary viscometers and other viscosity measuring equipment where operating temperature is controlled precisely. At Paragon Scientific we understand the importance of accurate calibration in your laboratory so we only source the highest quality raw materials for use in the manufacture of all our Viscosity Standards. Using only the best quality materials means that our standards are very stable in all environments, you will not experience 'flocking' (associated with cool environments), discolouration or sedimentation.

We fully test our products at every given data point, so you can be assured that the certified value given is the most accurate available. There are no exceptions or disclaimers on our test certificates and labels, what you see is EXACTLY what you get.

Paragon Scientific Viscosity Standards are certified to BS/EN/IEC/ISO 17025

/ISO Guide 34, accredited by UKAS, and are manufactured and tested in accordance with the primary method for viscosity determination which references the value of water as 1.0034 mm2/s (cSt) at 20°C(1.0016 mPa·s (cP) at 20°C.)

What is meant by  UKAS
The United Kingdom Accreditation Service (UKAS) is the sole accreditation body recognised by the UK government to assess, against internationally recognised standards, organisations that provide certification, testing, inspection and calibration services. Accreditation by UKAS demonstrates the competence, impartiality and sustainable performance of these evaluators

What is BS/EN/ISO/IEC 17025
ISO 17025 is a recognised international standard that specifies the requirements for the competence to carry out testing and or calibrations to a standard dictated by international methods. The international standard requires that an accredited facility comply with all the requirements detailed within the varied sections of the standard. These sections range from assuring the quality of test and calibration results to accommodation, environmental conditions, and purchasing.

ISO17025 is applicable to laboratories that operate in a  multitude of business sectors, some of which include automotive, cosmetics, micro-electronics, petro-chemical, pharmaceutical and power generation.

What is ISO Guide 34
ISO Guide 34 provides the highest level of Quality Assurance, confirming the expertise of the manufacturer, the integrity of the production systems and the reliability of the Certified Reference Materials that it produces.

• Certified according to ISO 17025 / ISO Guide 34 under UKAS accreditation
• Manufactured in accordance with ASTM D 2162 (Standard Practice for basic calibration of master viscometers and viscosity standard oils)
• Density g/mL in accordance with ASTM D 1480
• Kinematic (cSt) & dynamic viscosity (mPa·s) given at all temperatures
• Standard Pack Size 500ml, available also in 5L, 10L, 20L 
• Fully traceable to National Standards
• Ensures full compliance to ASTM & IP test method protocol
• Tamper evident security packaging
• 2 Year shelf  life
• Manufactured in the United Kingdom

This product is not classified as hazardous to ship.

(Tariff Number 27.10.19.99)

Capillary Viscometer Recalibration

Custom Blending

Glass Capillary Viscometers

Thermostatic Baths & Circulators

Viscometer Holders & Hangers

Viscosity Baths

Viscosity Standards

Viscosity Testing Accessories

Paragon ISO 17025 / ISO Guide 34 certified viscosity standards are for the calibration and verification of glass capillary viscometers and other viscosity measuring equipment where operating temperature is controlled precisely. At Paragon Scientific we understand the importance of accurate calibration in your laboratory so we only source the highest quality raw materials for use in the manufacture of all our Viscosity Standards. Using only the best quality materials means that our standards are very stable in all environments, you will not experience 'flocking' (associated with cool environments), discolouration or sedimentation.

We fully test our products at every given data point, so you can be assured that the certified value given is the most accurate available. There are no exceptions or disclaimers on our test certificates and labels, what you see is EXACTLY what you get.

Paragon Scientific Viscosity Standards are certified to BS/EN/IEC/ISO 17025 /ISO Guide 34, accredited by UKAS, and are manufactured and tested in accordance with the primary method for viscosity determination which references the value of water as 1.0034 mm2/s (cSt) at 20°C(1.0016 mPa·s (cP) at 20°C.)

What is meant by  UKAS
The United Kingdom Accreditation Service (UKAS) is the sole accreditation body recognised by the UK government to assess, against internationally recognised standards, organisations that provide certification, testing, inspection and calibration services. Accreditation by UKAS demonstrates the competence, impartiality and sustainable performance of these evaluators

What is BS/EN/ISO/IEC 17025
ISO 17025 is a recognised international standard that specifies the requirements for the competence to carry out testing and or calibrations to a standard dictated by international methods. The international standard requires that an accredited facility comply with all the requirements detailed within the varied sections of the standard. These sections range from assuring the quality of test and calibration results to accommodation, environmental conditions, and purchasing.

ISO17025 is applicable to laboratories that operate in a  multitude of business sectors, some of which include automotive, cosmetics, micro-electronics, petro-chemical, pharmaceutical and power generation.

What is ISO Guide 34
ISO Guide 34 provides the highest level of Quality Assurance, confirming the expertise of the manufacturer, the integrity of the production systems and the reliability of the Certified Reference Materials that it produces.

• Certified according to ISO 17025 / ISO Guide 34 under UKAS accreditation
• Manufactured in accordance with ASTM D 2162 (Standard Practice for basic calibration of master viscometers and viscosity standard oils)
• Density g/mL in accordance with ASTM D 1480
• Kinematic (cSt) & dynamic viscosity (mPa·s) given at all temperatures
• Standard Pack Size 500ml, available also in 5L, 10L, 20L
• Fully traceable to National Standards
• Ensures full compliance to ASTM & IP test method protocol
• Tamper evident security packaging
• 2 Year shelf  life
  Manufactured in the United Kingdom

This product is not classified as hazardous to ship.

(Tariff Number 27.10.19.99)

Capillary Viscometer Recalibration

Custom Blending

Glass Capillary Viscometers

Thermostatic Baths & Circulators

Viscometer Holders & Hangers

Viscosity Baths

Viscosity Standards

Viscosity Testing Accessories

Paragon ISO 17025 / ISO Guide 34 certified viscosity standards are for the calibration and verification of glass capillary viscometers and other viscosity measuring equipment where operating temperature is controlled precisely. At Paragon Scientific we understand the importance of accurate calibration in your laboratory so we only source the highest quality raw materials for use in the manufacture of all our Viscosity Standards. Using only the best quality materials means that our standards are very stable in all environments, you will not experience 'flocking' (associated with cool environments), discolouration or sedimentation.

We fully test our products at every given data point, so you can be assured that the certified value given is the most accurate available. There are no exceptions or disclaimers on our test certificates and labels, what you see is EXACTLY what you get.

Paragon Scientific Viscosity Standards are certified to BS/EN/IEC/ISO 17025 /ISO Guide 34, accredited by UKAS, and are manufactured and tested in accordance with the primary method for viscosity determination which references the value of water as 1.0034 mm2/s (cSt) at 20°C(1.0016 mPa·s (cP) at 20°C.)

What is meant by  UKAS
The United Kingdom Accreditation Service (UKAS) is the sole accreditation body recognised by the UK government to assess, against internationally recognised standards, organisations that provide certification, testing, inspection and calibration services. Accreditation by UKAS demonstrates the competence, impartiality and sustainable performance of these evaluators

What is BS/EN/ISO/IEC 17025
ISO 17025 is a recognised international standard that specifies the requirements for the competence to carry out testing and or calibrations to a standard dictated by international methods. The international standard requires that an accredited facility comply with all the requirements detailed within the varied sections of the standard. These sections range from assuring the quality of test and calibration results to accommodation, environmental conditions, and purchasing.

ISO17025 is applicable to laboratories that operate in a  multitude of business sectors, some of which include automotive, cosmetics, micro-electronics, petro-chemical, pharmaceutical and power generation.

What is ISO Guide 34
ISO Guide 34 provides the highest level of Quality Assurance, confirming the expertise of the manufacturer, the integrity of the production systems and the reliability of the Certified Reference Materials that it produces.

• Certified according to ISO 17025 / ISO Guide 34 under UKAS accreditation
• Manufactured in accordance with ASTM D 2162 (Standard Practice for basic calibration of master viscometers and viscosity standard oils)
• Density g/mL in accordance with ASTM D 1480
• Kinematic (cSt) & dynamic viscosity (mPa·s) given at all temperatures
• Standard Pack Size 500ml, available also in 5L, 10L, 20L 
• Fully traceable to National Standards
• Ensures full compliance to ASTM & IP test method protocol
• Tamper evident security packaging
• 2 Year shelf  life
• Manufactured in the United Kingdom

This product is not classified as hazardous to ship.

(Tariff Number 27.10.19.99)

Capillary Viscometer Recalibration

Custom Blending

Glass Capillary Viscometers

Thermostatic Baths & Circulators

Viscometer Holders & Hangers

Viscosity Baths

Viscosity Standards

Viscosity Testing Accessories

Paragon ISO 17025 / ISO Guide 34 certified viscosity standards are for the calibration and verification of glass capillary viscometers and other viscosity measuring equipment where operating temperature is controlled precisely. At Paragon Scientific we understand the importance of accurate calibration in your laboratory so we only source the highest quality raw materials for use in the manufacture of all our Viscosity Standards. Using only the best quality materials means that our standards are very stable in all environments, you will not experience 'flocking' (associated with cool environments), discolouration or sedimentation.

We fully test our products at every given data point, so you can be assured that the certified value given is the most accurate available. There are no exceptions or disclaimers on our test certificates and labels, what you see is EXACTLY what you get.

Paragon Scientific Viscosity Standards are certified to BS/EN/IEC/ISO 17025

/ ISO Guide 34, accredited by UKAS, and are manufactured and tested in accordance with the primary method for viscosity determination which references the value of water as 1.0034 mm2/s (cSt) at 20°C(1.0016 mPa·s (cP) at 20°C.)

What is meant by  UKAS
The United Kingdom Accreditation Service (UKAS) is the sole accreditation body recognised by the UK government to assess, against internationally recognised standards, organisations that provide certification, testing, inspection and calibration services. Accreditation by UKAS demonstrates the competence, impartiality and sustainable performance of these evaluators

What is BS/EN/ISO/IEC 17025
ISO 17025 is a recognised international standard that specifies the requirements for the competence to carry out testing and or calibrations to a standard dictated by international methods. The international standard requires that an accredited facility comply with all the requirements detailed within the varied sections of the standard. These sections range from assuring the quality of test and calibration results to accommodation, environmental conditions, and purchasing.

ISO17025 is applicable to laboratories that operate in a  multitude of business sectors, some of which include automotive, cosmetics, micro-electronics, petro-chemical, pharmaceutical and power generation.

What is ISO Guide 34
ISO Guide 34 provides the highest level of Quality Assurance, confirming the expertise of the manufacturer, the integrity of the production systems and the reliability of the Certified Reference Materials that it produces.

• Certified according to ISO 17025 / ISO Guide 34 under UKAS accreditation
• Manufactured in accordance with ASTM D 2162 (Standard Practice for basic calibration of master viscometers and viscosity standard oils)
• Density g/mL in accordance with ASTM D 1480
• Kinematic (cSt) & dynamic viscosity (mPa·s) given at all temperatures
• Standard Pack Size 500ml, available also in 5L, 10L, 20L 
• Fully traceable to National Standards
• Ensures full compliance to ASTM & IP test method protocol
• Tamper evident security packaging
• 2 Year shelf  life
• Manufactured in the United Kingdom

This product is not classified as hazardous to ship.

(Tariff Number 27.10.19.99)

Capillary Viscometer Recalibration

Custom Blending

Glass Capillary Viscometers

Thermostatic Baths & Circulators

Viscometer Holders & Hangers

Viscosity Baths

Viscosity Standards

Viscosity Testing Accessories

Paragon ISO 17025 / ISO Guide 34 certified viscosity standards are for the calibration and verification of glass capillary viscometers and other viscosity measuring equipment where operating temperature is controlled precisely. At Paragon Scientific we understand the importance of accurate calibration in your laboratory so we only source the highest quality raw materials for use in the manufacture of all our Viscosity Standards. Using only the best quality materials means that our standards are very stable in all environments, you will not experience 'flocking' (associated with cool environments), discolouration or sedimentation.

We fully test our products at every given data point, so you can be assured that the certified value given is the most accurate available. There are no exceptions or disclaimers on our test certificates and labels, what you see is EXACTLY what you get.

Paragon Scientific Viscosity Standards are certified to BS/EN/IEC/ISO 17025

/ISO Guide 34, accredited by UKAS, and are manufactured and tested in accordance with the primary method for viscosity determination which references the value of water as 1.0034 mm2/s (cSt) at 20°C(1.0016 mPa·s (cP) at 20°C.)

What is meant by  UKAS
The United Kingdom Accreditation Service (UKAS) is the sole accreditation body recognised by the UK government to assess, against internationally recognised standards, organisations that provide certification, testing, inspection and calibration services. Accreditation by UKAS demonstrates the competence, impartiality and sustainable performance of these evaluators

What is BS/EN/ISO/IEC 17025
ISO 17025 is a recognised international standard that specifies the requirements for the competence to carry out testing and or calibrations to a standard dictated by international methods. The international standard requires that an accredited facility comply with all the requirements detailed within the varied sections of the standard. These sections range from assuring the quality of test and calibration results to accommodation, environmental conditions, and purchasing.

ISO17025 is applicable to laboratories that operate in a  multitude of business sectors, some of which include automotive, cosmetics, micro-electronics, petro-chemical, pharmaceutical and power generation.

What is ISO Guide 34
ISO Guide 34 provides the highest level of Quality Assurance, confirming the expertise of the manufacturer, the integrity of the production systems and the reliability of the Certified Reference Materials that it produces.

• Certified according to ISO 17025 / ISO Guide 34 under UKAS accreditation
• Manufactured in accordance with ASTM D 2162 (Standard Practice for basic calibration of master viscometers and viscosity standard oils)
• Density g/mL in accordance with ASTM D 1480
• Kinematic (cSt) & dynamic viscosity (mPa·s) given at all temperatures
• Standard Pack Size 500ml, available also in 5L, 10L, 20L 
• Fully traceable to National Standards
• Ensures full compliance to ASTM & IP test method protocol
• Tamper evident security packaging
• 2 Year shelf  life
• Manufactured in the United Kingdom

This product is not classified as hazardous to ship.

(Tariff Number 27.10.19.99)

Capillary Viscometer Recalibration

Custom Blending

Glass Capillary Viscometers

Thermostatic Baths & Circulators

Viscometer Holders & Hangers

Viscosity Baths

Viscosity Standards

Viscosity Testing Accessories

Paragon ISO 17025 / ISO Guide 34 certified viscosity standards are for the calibration and verification of glass capillary viscometers and other viscosity measuring equipment where operating temperature is controlled precisely. At Paragon Scientific we understand the importance of accurate calibration in your laboratory so we only source the highest quality raw materials for use in the manufacture of all our Viscosity Standards. Using only the best quality materials means that our standards are very stable in all environments, you will not experience 'flocking' (associated with cool environments), discolouration or sedimentation.

We fully test our products at every given data point, so you can be assured that the certified value given is the most accurate available. There are no exceptions or disclaimers on our test certificates and labels, what you see is EXACTLY what you get.

Paragon Scientific Viscosity Standards are certified to BS/EN/IEC/ISO 17025

/ISO Guide 34, accredited by UKAS, and are manufactured and tested in accordance with the primary method for viscosity determination which references the value of water as 1.0034 mm2/s (cSt) at 20°C(1.0016 mPa·s (cP) at 20°C.)

What is meant by  UKAS
The United Kingdom Accreditation Service (UKAS) is the sole accreditation body recognised by the UK government to assess, against internationally recognised standards, organisations that provide certification, testing, inspection and calibration services. Accreditation by UKAS demonstrates the competence, impartiality and sustainable performance of these evaluators

What is BS/EN/ISO/IEC 17025
ISO 17025 is a recognised international standard that specifies the requirements for the competence to carry out testing and or calibrations to a standard dictated by international methods. The international standard requires that an accredited facility comply with all the requirements detailed within the varied sections of the standard. These sections range from assuring the quality of test and calibration results to accommodation, environmental conditions, and purchasing.

ISO17025 is applicable to laboratories that operate in a  multitude of business sectors, some of which include automotive, cosmetics, micro-electronics, petro-chemical, pharmaceutical and power generation.

What is ISO Guide 34
ISO Guide 34 provides the highest level of Quality Assurance, confirming the expertise of the manufacturer, the integrity of the production systems and the reliability of the Certified Reference Materials that it produces.

• Certified according to ISO 17025 / ISO Guide 34 under UKAS accreditation
• Manufactured in accordance with ASTM D 2162 (Standard Practice for basic calibration of master viscometers and viscosity standard oils)
• Density g/mL in accordance with ASTM D 1480
• Kinematic (cSt) & dynamic viscosity (mPa·s) given at all temperatures
• Standard Pack Size 500ml, available also in 5L, 10L, 20L 
• Fully traceable to National Standards
• Ensures full compliance to ASTM & IP test method protocol
• Tamper evident security packaging
• 2 Year shelf  life
• Manufactured in the United Kingdom

This product is not classified as hazardous to ship.

(Tariff Number 27.10.19.99)

Capillary Viscometer Recalibration

Custom Blending

Glass Capillary Viscometers

Thermostatic Baths & Circulators

Viscometer Holders & Hangers

Viscosity Baths

Viscosity Standards

Viscosity Testing Accessories

Paragon ISO 17025 / ISO Guide 34 certified viscosity standards are for the calibration and verification of glass capillary viscometers and other viscosity measuring equipment where operating temperature is controlled precisely. At Paragon Scientific we understand the importance of accurate calibration in your laboratory so we only source the highest quality raw materials for use in the manufacture of all our Viscosity Standards. Using only the best quality materials means that our standards are very stable in all environments, you will not experience 'flocking' (associated with cool environments), discolouration or sedimentation.

We fully test our products at every given data point, so you can be assured that the certified value given is the most accurate available. There are no exceptions or disclaimers on our test certificates and labels, what you see is EXACTLY what you get.

Paragon Scientific Viscosity Standards are certified to BS/EN/IEC/ISO 17025

/ISO Guide 34, accredited by UKAS, and are manufactured and tested in accordance with the primary method for viscosity determination which references the value of water as 1.0034 mm2/s (cSt) at 20°C(1.0016 mPa·s (cP) at 20°C.)

What is meant by  UKAS
The United Kingdom Accreditation Service (UKAS) is the sole accreditation body recognised by the UK government to assess, against internationally recognised standards, organisations that provide certification, testing, inspection and calibration services. Accreditation by UKAS demonstrates the competence, impartiality and sustainable performance of these evaluators

What is BS/EN/ISO/IEC 17025
ISO 17025 is a recognised international standard that specifies the requirements for the competence to carry out testing and or calibrations to a standard dictated by international methods. The international standard requires that an accredited facility comply with all the requirements detailed within the varied sections of the standard. These sections range from assuring the quality of test and calibration results to accommodation, environmental conditions, and purchasing.

ISO17025 is applicable to laboratories that operate in a  multitude of business sectors, some of which include automotive, cosmetics, micro-electronics, petro-chemical, pharmaceutical and power generation.

What is ISO Guide 34
ISO Guide 34 provides the highest level of Quality Assurance, confirming the expertise of the manufacturer, the integrity of the production systems and the reliability of the Certified Reference Materials that it produces.

• Certified according to ISO 17025 / ISO Guide 34 under UKAS accreditation
• Manufactured in accordance with ASTM D 2162 (Standard Practice for basic calibration of master viscometers and viscosity standard oils)
• Density g/mL in accordance with ASTM D 1480
• Kinematic (cSt) & dynamic viscosity (mPa·s) given at all temperatures
• Standard Pack Size 500ml, available also in 5L, 10L, 20L 
• Fully traceable to National Standards
• Ensures full compliance to ASTM & IP test method protocol
• Tamper evident security packaging
• 2 Year shelf  life
• Manufactured in the United Kingdom

This product is not classified as hazardous to ship.

(Tariff Number 27.10.19.99)

Capillary Viscometer Recalibration

Custom Blending

Glass Capillary Viscometers

Thermostatic Baths & Circulators

Viscometer Holders & Hangers

Viscosity Baths

Viscosity Standards

Viscosity Testing Accessories

For the calibration and verification of glass capillary viscometers and other viscosity measuring equipment where operating temperature is controlled precisely. At Paragon Scientific we understand the importance of accurate calibration in your laboratory so we only source the highest quality raw materials for use in the manufacture of all our Viscosity Standards. Using only the best quality materials means that our standards are very stable in all environments, you will not experience 'flocking' (associated with cool environments), discolouration or sedimentation.

We fully test our products at every given data point, so you can be assured that the certified value given is the most accurate available. There are no exceptions or disclaimers on our test certificates and labels, what you see is EXACTLY what you get.

Paragon Scientific Viscosity Standards are certified to BS/EN/IEC/ISO 17025 /ISO Guide 34, accredited by UKAS, and are manufactured and tested in accordance with the primary method for viscosity determination which references the value of water as 1.0034 mm2/s (cSt) at 20°C(1.0016 mPa·s (cP) at 20°C.)

What is meant by  UKAS
The United Kingdom Accreditation Service (UKAS) is the sole accreditation body recognised by the UK government to assess, against internationally recognised standards, organisations that provide certification, testing, inspection and calibration services. Accreditation by UKAS demonstrates the competence, impartiality and sustainable performance of these evaluators

What is BS/EN/ISO/IEC 17025
ISO 17025 is a recognised international standard that specifies the requirements for the competence to carry out testing and or calibrations to a standard dictated by international methods. The international standard requires that an accredited facility comply with all the requirements detailed within the varied sections of the standard. These sections range from assuring the quality of test and calibration results to accommodation, environmental conditions, and purchasing. ISO17025 is applicable to laboratories that operate in a  multitude of business sectors, some of which include automotive, cosmetics, micro-electronics, petro-chemical, pharmaceutical and power generation.

What is ISO Guide 34
ISO Guide 34 provides the highest level of Quality Assurance, confirming the expertise of the manufacturer, the integrity of the production systems and the reliability of the Certified Reference Materials that it produces.

• Manufactured in accordance with ASTM D 2162 (Standard Practice for basic calibration of master viscometers and viscosity standard oils)
• Density g/mL in accordance with ASTM D 1480
• Kinematic (cSt) & dynamic viscosity (mPa·s) given at all temperatures
• Certified according to ISO 17025 / ISO Guide 34 under UKAS accreditation
• Standard Pack Size 500ml, available also in 5L, 10L, 20L 
• Fully traceable to National Standards
• Ensures full compliance to ASTM & IP test method protocol
• Tamper evident security packaging
• 2 Year shelf life
• Manufactured in the United Kingdom

This product is not classified as hazardous to ship.

(Tariff Number 27.10.19.99)

Capillary Viscometer Recalibration

Custom Blending

Glass Capillary Viscometers

Thermostatic Baths & Circulators

Viscometer Holders & Hangers

Viscosity Baths

Viscosity Standards

Viscosity Testing Accessories

Paragon ISO 17025 / ISO Guide 34 certified viscosity standards are for the calibration and verification of glass capillary viscometers and other viscosity measuring equipment where operating temperature is controlled precisely. At Paragon Scientific we understand the importance of accurate calibration in your laboratory so we only source the highest quality raw materials for use in the manufacture of all our Viscosity Standards. Using only the best quality materials means that our standards are very stable in all environments, you will not experience 'flocking' (associated with cool environments), discolouration or sedimentation.

We fully test our products at every given data point, so you can be assured that the certified value given is the most accurate available. There are no exceptions or disclaimers on our test certificates and labels, what you see is EXACTLY what you get.

Paragon Scientific Viscosity Standards are certified to BS/EN/IEC/ISO 17025

/ISO Guide 34, accredited by UKAS, and are manufactured and tested in accordance with the primary method for viscosity determination which references the value of water as 1.0034 mm2/s (cSt) at 20°C(1.0016 mPa·s (cP) at 20°C.)

What is meant by  UKAS
The United Kingdom Accreditation Service (UKAS) is the sole accreditation body recognised by the UK government to assess, against internationally recognised standards, organisations that provide certification, testing, inspection and calibration services. Accreditation by UKAS demonstrates the competence, impartiality and sustainable performance of these evaluators

What is BS/EN/ISO/IEC 17025
ISO 17025 is a recognised international standard that specifies the requirements for the competence to carry out testing and or calibrations to a standard dictated by international methods. The international standard requires that an accredited facility comply with all the requirements detailed within the varied sections of the standard. These sections range from assuring the quality of test and calibration results to accommodation, environmental conditions, and purchasing.

ISO17025 is applicable to laboratories that operate in a  multitude of business sectors, some of which include automotive, cosmetics, micro-electronics, petro-chemical, pharmaceutical and power generation.

What is ISO Guide 34
ISO Guide 34 provides the highest level of Quality Assurance, confirming the expertise of the manufacturer, the integrity of the production systems and the reliability of the Certified Reference Materials that it produces.

• Certified according to ISO 17025 / ISO Guide 34 under UKAS accreditation
• Manufactured in accordance with ASTM D 2162 (Standard Practice for basic calibration of master viscometers and viscosity standard oils)
• Density g/mL in accordance with ASTM D 1480
• Kinematic (cSt) & dynamic viscosity (mPa·s) given at all temperatures
• Standard Pack Size 500ml, available also in 5L, 10L, 20L 
• Fully traceable to National Standards
• Ensures full compliance to ASTM & IP test method protocol
• Tamper evident security packaging
• 2 Year shelf  life
• Manufactured in the United Kingdom

This product is not classified as hazardous to ship.

(Tariff Number 27.10.19.99)

Capillary Viscometer Recalibration

Custom Blending

Glass Capillary Viscometers

Thermostatic Baths & Circulators

Viscometer Holders & Hangers

Viscosity Baths

Viscosity Standards

Viscosity Testing Accessories

Paragon ISO 17025 / ISO Guide 34 certified viscosity standards are for the calibration and verification of glass capillary viscometers and other viscosity measuring equipment where operating temperature is controlled precisely. At Paragon Scientific we understand the importance of accurate calibration in your laboratory so we only source the highest quality raw materials for use in the manufacture of all our Viscosity Standards. Using only the best quality materials means that our standards are very stable in all environments, you will not experience 'flocking' (associated with cool environments), discolouration or sedimentation.

We fully test our products at every given data point, so you can be assured that the certified value given is the most accurate available. There are no exceptions or disclaimers on our test certificates and labels, what you see is EXACTLY what you get.

Paragon Scientific Viscosity Standards are certified to BS/EN/IEC/ISO 17025

/ISO Guide 34, accredited by UKAS, and are manufactured and tested in accordance with the primary method for viscosity determination which references the value of water as 1.0034 mm2/s (cSt) at 20°C(1.0016 mPa·s (cP) at 20°C.)

What is meant by  UKAS
The United Kingdom Accreditation Service (UKAS) is the sole accreditation body recognised by the UK government to assess, against internationally recognised standards, organisations that provide certification, testing, inspection and calibration services. Accreditation by UKAS demonstrates the competence, impartiality and sustainable performance of these evaluators

What is BS/EN/ISO/IEC 17025
ISO 17025 is a recognised international standard that specifies the requirements for the competence to carry out testing and or calibrations to a standard dictated by international methods. The international standard requires that an accredited facility comply with all the requirements detailed within the varied sections of the standard. These sections range from assuring the quality of test and calibration results to accommodation, environmental conditions, and purchasing.

ISO17025 is applicable to laboratories that operate in a  multitude of business sectors, some of which include automotive, cosmetics, micro-electronics, petro-chemical, pharmaceutical and power generation.

What is ISO Guide 34
ISO Guide 34 provides the highest level of Quality Assurance, confirming the expertise of the manufacturer, the integrity of the production systems and the reliability of the Certified Reference Materials that it produces.

• Certified according to ISO 17025 / ISO Guide 34 under UKAS accreditation
• Manufactured in accordance with ASTM D 2162 (Standard Practice for basic calibration of master viscometers and viscosity standard oils)
• Density g/mL in accordance with ASTM D 1480
• Kinematic (cSt) & dynamic viscosity (mPa·s) given at all temperatures
• Standard Pack Size 500ml, available also in 5L, 10L, 20L 
• Fully traceable to National Standards
• Ensures full compliance to ASTM & IP test method protocol
• Tamper evident security packaging
• 2 Year shelf  life
• Manufactured in the United Kingdom

This product is not classified as hazardous to ship.

(Tariff Number 27.10.19.99)

Capillary Viscometer Recalibration

Custom Blending

Glass Capillary Viscometers

Thermostatic Baths & Circulators

Viscometer Holders & Hangers

Viscosity Baths

Viscosity Standards

Viscosity Testing Accessories

For the calibration and verification of glass capillary viscometers and other viscosity measuring equipment where operating temperature is controlled precisely. At Paragon Scientific we understand the importance of accurate calibration in your laboratory so we only source the highest quality raw materials for use in the manufacture of all our Viscosity Standards. Using only the best quality materials means that our standards are very stable in all environments, you will not experience 'flocking' (associated with cool environments), discolouration or sedimentation.

We fully test our products at every given data point, so you can be assured that the certified value given is the most accurate available. There are no exceptions or disclaimers on our test certificates and labels, what you see is EXACTLY what you get.

Paragon Scientific Viscosity Standards are certified to BS/EN/IEC/ISO 17025 /ISO Guide 34, accredited by UKAS, and are manufactured and tested in accordance with the primary method for viscosity determination which references the value of water as 1.0034 mm2/s (cSt) at 20°C(1.0016 mPa·s (cP) at 20°C.)

What is meant by  UKAS
The United Kingdom Accreditation Service (UKAS) is the sole accreditation body recognised by the UK government to assess, against internationally recognised standards, organisations that provide certification, testing, inspection and calibration services. Accreditation by UKAS demonstrates the competence, impartiality and sustainable performance of these evaluators

What is BS/EN/ISO/IEC 17025
ISO 17025 is a recognised international standard that specifies the requirements for the competence to carry out testing and or calibrations to a standard dictated by international methods. The international standard requires that an accredited facility comply with all the requirements detailed within the varied sections of the standard. These sections range from assuring the quality of test and calibration results to accommodation, environmental conditions, and purchasing. ISO17025 is applicable to laboratories that operate in a  multitude of business sectors, some of which include automotive, cosmetics, micro-electronics, petro-chemical, pharmaceutical and power generation.

What is ISO Guide 34
ISO Guide 34 provides the highest level of Quality Assurance, confirming the expertise of the manufacturer, the integrity of the production systems and the reliability of the Certified Reference Materials that it produces.

• Manufactured in accordance with ASTM D 2162 (Standard Practice for basic calibration of master viscometers and viscosity standard oils)
• Density g/mL in accordance with ASTM D 1480
• Kinematic (cSt) & dynamic viscosity (mPa·s) given at all temperatures
• Certified according to ISO 17025 / ISO Guide 34 under UKAS accreditation
• Standard Pack Size 500ml, available also in 5L, 10L, 20L 
• Fully traceable to National Standards
• Ensures full compliance to ASTM & IP test method protocol
• Tamper evident security packaging
• 2 Year shelf life
• Manufactured in the United Kingdom

This product is not classified as hazardous to ship.

(Tariff Number 27.10.19.99)

Capillary Viscometer Recalibration

Custom Blending

Glass Capillary Viscometers

Thermostatic Baths & Circulators

Viscometer Holders & Hangers

Viscosity Baths

Viscosity Standards

Viscosity Testing Accessories

Paragon ISO 17025 / ISO Guide 34 certified viscosity standards are for the calibration and verification of glass capillary viscometers and other viscosity measuring equipment where operating temperature is controlled precisely. At Paragon Scientific we understand the importance of accurate calibration in your laboratory so we only source the highest quality raw materials for use in the manufacture of all our Viscosity Standards. Using only the best quality materials means that our standards are very stable in all environments, you will not experience 'flocking' (associated with cool environments), discolouration or sedimentation.

We fully test our products at every given data point, so you can be assured that the certified value given is the most accurate available. There are no exceptions or disclaimers on our test certificates and labels, what you see is EXACTLY what you get.

Paragon Scientific Viscosity Standards are certified to BS/EN/IEC/ISO 17025

/ISO Guide 34, accredited by UKAS, and are manufactured and tested in accordance with the primary method for viscosity determination which references the value of water as 1.0034 mm2/s (cSt) at 20°C(1.0016 mPa·s (cP) at 20°C.)

What is meant by  UKAS
The United Kingdom Accreditation Service (UKAS) is the sole accreditation body recognised by the UK government to assess, against internationally recognised standards, organisations that provide certification, testing, inspection and calibration services. Accreditation by UKAS demonstrates the competence, impartiality and sustainable performance of these evaluators

What is BS/EN/ISO/IEC 17025
ISO 17025 is a recognised international standard that specifies the requirements for the competence to carry out testing and or calibrations to a standard dictated by international methods. The international standard requires that an accredited facility comply with all the requirements detailed within the varied sections of the standard. These sections range from assuring the quality of test and calibration results to accommodation, environmental conditions, and purchasing.

ISO17025 is applicable to laboratories that operate in a  multitude of business sectors, some of which include automotive, cosmetics, micro-electronics, petro-chemical, pharmaceutical and power generation.

What is ISO Guide 34
ISO Guide 34 provides the highest level of Quality Assurance, confirming the expertise of the manufacturer, the integrity of the production systems and the reliability of the Certified Reference Materials that it produces.

• Certified according to ISO 17025 / ISO Guide 34 under UKAS accreditation
• Manufactured in accordance with ASTM D 2162 (Standard Practice for basic calibration of master viscometers and viscosity standard oils)
• Density g/mL in accordance with ASTM D 1480
• Kinematic (cSt) & dynamic viscosity (mPa·s) given at all temperatures
• Standard Pack Size 500ml, available also in 5L, 10L, 20L 
• Fully traceable to National Standards
• Ensures full compliance to ASTM & IP test method protocol
• Tamper evident security packaging
• 2 Year shelf life
• Manufactured in the United Kingdom

This product is not classified as hazardous to ship.

(Tariff Number 27.10.19.99)

Capillary Viscometer Recalibration

Custom Blending

Glass Capillary Viscometers

Thermostatic Baths & Circulators

Viscometer Holders & Hangers

Viscosity Baths

Viscosity Standards

Viscosity Testing Accessories

Paragon ISO 17025 / ISO Guide 34 certified viscosity standards are for the calibration and verification of glass capillary viscometers and other viscosity measuring equipment where operating temperature is controlled precisely. At Paragon Scientific we understand the importance of accurate calibration in your laboratory so we only source the highest quality raw materials for use in the manufacture of all our Viscosity Standards. Using only the best quality materials means that our standards are very stable in all environments, you will not experience 'flocking' (associated with cool environments), discolouration or sedimentation.

We fully test our products at every given data point, so you can be assured that the certified value given is the most accurate available. There are no exceptions or disclaimers on our test certificates and labels, what you see is EXACTLY what you get.

Paragon Scientific Viscosity Standards are certified to BS/EN/IEC/ISO 17025

/ISO Guide 34, accredited by UKAS, and are manufactured and tested in accordance with the primary method for viscosity determination which references the value of water as 1.0034 mm2/s (cSt) at 20°C(1.0016 mPa·s (cP) at 20°C.)

What is meant by  UKAS
The United Kingdom Accreditation Service (UKAS) is the sole accreditation body recognised by the UK government to assess, against internationally recognised standards, organisations that provide certification, testing, inspection and calibration services. Accreditation by UKAS demonstrates the competence, impartiality and sustainable performance of these evaluators

What is BS/EN/ISO/IEC 17025
ISO 17025 is a recognised international standard that specifies the requirements for the competence to carry out testing and or calibrations to a standard dictated by international methods. The international standard requires that an accredited facility comply with all the requirements detailed within the varied sections of the standard. These sections range from assuring the quality of test and calibration results to accommodation, environmental conditions, and purchasing.

ISO17025 is applicable to laboratories that operate in a  multitude of business sectors, some of which include automotive, cosmetics, micro-electronics, petro-chemical, pharmaceutical and power generation.

What is ISO Guide 34
ISO Guide 34 provides the highest level of Quality Assurance, confirming the expertise of the manufacturer, the integrity of the production systems and the reliability of the Certified Reference Materials that it produces.

• Certified according to ISO 17025 / ISO Guide 34 under UKAS accreditation
• Manufactured in accordance with ASTM D 2162 (Standard Practice for basic calibration of master viscometers and viscosity standard oils)
• Density g/mL in accordance with ASTM D 1480
• Kinematic (cSt) & dynamic viscosity (mPa·s) given at all temperatures
• Standard Pack Size 500ml, available also in 5L, 10L, 20L 
• Fully traceable to National Standards
• Ensures full compliance to ASTM & IP test method protocol
• Tamper evident security packaging
• 2 Year shelf  life
• Manufactured in the United Kingdom

This product is not classified as hazardous to ship.

(Tariff Number 27.10.19.99)

Capillary Viscometer Recalibration

Custom Blending

Glass Capillary Viscometers

Thermostatic Baths & Circulators

Viscometer Holders & Hangers

Viscosity Baths

Viscosity Standards

Viscosity Testing Accessories

Paragon ISO 17025 / ISO Guide 34 certified viscosity standards are for the calibration and verification of glass capillary viscometers and other viscosity measuring equipment where operating temperature is controlled precisely. At Paragon Scientific we understand the importance of accurate calibration in your laboratory so we only source the highest quality raw materials for use in the manufacture of all our Viscosity Standards. Using only the best quality materials means that our standards are very stable in all environments, you will not experience 'flocking' (associated with cool environments), discolouration or sedimentation.

We fully test our products at every given data point, so you can be assured that the certified value given is the most accurate available. There are no exceptions or disclaimers on our test certificates and labels, what you see is EXACTLY what you get.

Paragon Scientific Viscosity Standards are certified to BS/EN/IEC/ISO 17025

/ISO Guide 34, accredited by UKAS, and are manufactured and tested in accordance with the primary method for viscosity determination which references the value of water as 1.0034 mm2/s (cSt) at 20°C(1.0016 mPa·s (cP) at 20°C.)

What is meant by  UKAS
The United Kingdom Accreditation Service (UKAS) is the sole accreditation body recognised by the UK government to assess, against internationally recognised standards, organisations that provide certification, testing, inspection and calibration services. Accreditation by UKAS demonstrates the competence, impartiality and sustainable performance of these evaluators

What is BS/EN/ISO/IEC 17025
ISO 17025 is a recognised international standard that specifies the requirements for the competence to carry out testing and or calibrations to a standard dictated by international methods. The international standard requires that an accredited facility comply with all the requirements detailed within the varied sections of the standard. These sections range from assuring the quality of test and calibration results to accommodation, environmental conditions, and purchasing.

ISO17025 is applicable to laboratories that operate in a  multitude of business sectors, some of which include automotive, cosmetics, micro-electronics, petro-chemical, pharmaceutical and power generation.

What is ISO Guide 34
ISO Guide 34 provides the highest level of Quality Assurance, confirming the expertise of the manufacturer, the integrity of the production systems and the reliability of the Certified Reference Materials that it produces.

• Certified according to ISO 17025 / ISO Guide 34 under UKAS accreditation
• Manufactured in accordance with ASTM D 2162 (Standard Practice for basic calibration of master viscometers and viscosity standard oils)
• Density g/mL in accordance with ASTM D 1480
• Kinematic (cSt) & dynamic viscosity (mPa·s) given at all temperatures
• Standard Pack Size 500ml, available also in 5L, 10L, 20L 
• Fully traceable to National Standards
• Ensures full compliance to ASTM & IP test method protocol
• Tamper evident security packaging
• 2 Year shelf  life
• Manufactured in the United Kingdom

This product is not classified as hazardous to ship.

(Tariff Number 27.10.19.99)

Capillary Viscometer Recalibration

Custom Blending

Glass Capillary Viscometers

Thermostatic Baths & Circulators

Viscometer Holders & Hangers

Viscosity Baths

Viscosity Standards

Viscosity Testing Accessories

For the calibration and verification of glass capillary viscometers and other viscosity measuring equipment where operating temperature is controlled precisely. At Paragon Scientific we understand the importance of accurate calibration in your laboratory so we only source the highest quality raw materials for use in the manufacture of all our Viscosity Standards. Using only the best quality materials means that our standards are very stable in all environments, you will not experience 'flocking' (associated with cool environments), discolouration or sedimentation.

We fully test our products at every given data point, so you can be assured that the certified value given is the most accurate available. There are no exceptions or disclaimers on our test certificates and labels, what you see is EXACTLY what you get.

Paragon Scientific Viscosity Standards are certified to BS/EN/IEC/ISO 17025 /ISO Guide 34, accredited by UKAS, and are manufactured and tested in accordance with the primary method for viscosity determination which references the value of water as 1.0034 mm2/s (cSt) at 20°C(1.0016 mPa·s (cP) at 20°C.)

What is meant by  UKAS
The United Kingdom Accreditation Service (UKAS) is the sole accreditation body recognised by the UK government to assess, against internationally recognised standards, organisations that provide certification, testing, inspection and calibration services. Accreditation by UKAS demonstrates the competence, impartiality and sustainable performance of these evaluators

What is BS/EN/ISO/IEC 17025
ISO 17025 is a recognised international standard that specifies the requirements for the competence to carry out testing and or calibrations to a standard dictated by international methods. The international standard requires that an accredited facility comply with all the requirements detailed within the varied sections of the standard. These sections range from assuring the quality of test and calibration results to accommodation, environmental conditions, and purchasing. ISO17025 is applicable to laboratories that operate in a  multitude of business sectors, some of which include automotive, cosmetics, micro-electronics, petro-chemical, pharmaceutical and power generation.

What is ISO Guide 34
ISO Guide 34 provides the highest level of Quality Assurance, confirming the expertise of the manufacturer, the integrity of the production systems and the reliability of the Certified Reference Materials that it produces.

• Manufactured in accordance with ASTM D 2162 (Standard Practice for basic calibration of master viscometers and viscosity standard oils)
• Density g/mL in accordance with ASTM D 1480
• Kinematic (cSt) & dynamic viscosity (mPa·s) given at all temperatures
• Certified according to ISO 17025 / ISO Guide 34 under UKAS accreditation
• Standard Pack Size 500ml, available also in 5L, 10L, 20L 
• Fully traceable to National Standards
• Ensures full compliance to ASTM & IP test method protocol
• Tamper evident security packaging
• 2 Year shelf  life
• Manufactured in the United Kingdom

This product is not classified as hazardous to ship.

(Tariff Number 27.10.19.99)

Capillary Viscometer Recalibration

Custom Blending

Glass Capillary Viscometers

Thermostatic Baths & Circulators

Viscometer Holders & Hangers

Viscosity Baths

Viscosity Standards

Viscosity Testing Accessories

For the calibration and verification of glass capillary viscometers and other viscosity measuring equipment where operating temperature is controlled precisely. At Paragon Scientific we understand the importance of accurate calibration in your laboratory so we only source the highest quality raw materials for use in the manufacture of all our Viscosity Standards. Using only the best quality materials means that our standards are very stable in all environments, you will not experience 'flocking' (associated with cool environments), discolouration or sedimentation.

We fully test our products at every given data point, so you can be assured that the certified value given is the most accurate available. There are no exceptions or disclaimers on our test certificates and labels, what you see is EXACTLY what you get.

Paragon Scientific Viscosity Standards are certified to BS/EN/IEC/ISO 17025 /ISO Guide 34, accredited by UKAS, and are manufactured and tested in accordance with the primary method for viscosity determination which references the value of water as 1.0034 mm2/s (cSt) at 20°C(1.0016 mPa·s (cP) at 20°C.)

What is meant by  UKAS
The United Kingdom Accreditation Service (UKAS) is the sole accreditation body recognised by the UK government to assess, against internationally recognised standards, organisations that provide certification, testing, inspection and calibration services. Accreditation by UKAS demonstrates the competence, impartiality and sustainable performance of these evaluators

What is BS/EN/ISO/IEC 17025
ISO 17025 is a recognised international standard that specifies the requirements for the competence to carry out testing and or calibrations to a standard dictated by international methods. The international standard requires that an accredited facility comply with all the requirements detailed within the varied sections of the standard. These sections range from assuring the quality of test and calibration results to accommodation, environmental conditions, and purchasing. ISO17025 is applicable to laboratories that operate in a  multitude of business sectors, some of which include automotive, cosmetics, micro-electronics, petro-chemical, pharmaceutical and power generation.

What is ISO Guide 34
ISO Guide 34 provides the highest level of Quality Assurance, confirming the expertise of the manufacturer, the integrity of the production systems and the reliability of the Certified Reference Materials that it produces.

• Manufactured in accordance with ASTM D 2162 (Standard Practice for basic calibration of master viscometers and viscosity standard oils)
• Density g/mL in accordance with ASTM D 1480
• Kinematic (cSt) & dynamic viscosity (mPa·s) given at all temperatures
• Certified according to ISO 17025 / ISO Guide 34 under UKAS accreditation
• Standard Pack Size 500ml, available also in 5L, 10L, 20L 
• Fully traceable to National Standards
• Ensures full compliance to ASTM & IP test method protocol
• Tamper evident security packaging
• 2 Year shelf  life
• Manufactured in the United Kingdom

This product is not classified as hazardous to ship.

(Tariff Number 27.10.19.99)

Capillary Viscometer Recalibration

Custom Blending

Glass Capillary Viscometers

Thermostatic Baths & Circulators

Viscometer Holders & Hangers

Viscosity Baths

Viscosity Standards

Viscosity Testing Accessories

Paragon ISO 17025 / ISO Guide 34 certified viscosity standards are for the calibration and verification of glass capillary viscometers and other viscosity measuring equipment where operating temperature is controlled precisely. At Paragon Scientific we understand the importance of accurate calibration in your laboratory so we only source the highest quality raw materials for use in the manufacture of all our Viscosity Standards. Using only the best quality materials means that our standards are very stable in all environments, you will not experience 'flocking' (associated with cool environments), discolouration or sedimentation.

We fully test our products at every given data point, so you can be assured that the certified value given is the most accurate available. There are no exceptions or disclaimers on our test certificates and labels, what you see is EXACTLY what you get.

Paragon Scientific Viscosity Standards are certified to BS/EN/IEC/ISO 17025

/ISO Guide 34, accredited by UKAS, and are manufactured and tested in accordance with the primary method for viscosity determination which references the value of water as 1.0034 mm2/s (cSt) at 20°C(1.0016 mPa·s (cP) at 20°C.)

What is meant by  UKAS
The United Kingdom Accreditation Service (UKAS) is the sole accreditation body recognised by the UK government to assess, against internationally recognised standards, organisations that provide certification, testing, inspection and calibration services. Accreditation by UKAS demonstrates the competence, impartiality and sustainable performance of these evaluators

What is BS/EN/ISO/IEC 17025
ISO 17025 is a recognised international standard that specifies the requirements for the competence to carry out testing and or calibrations to a standard dictated by international methods. The international standard requires that an accredited facility comply with all the requirements detailed within the varied sections of the standard. These sections range from assuring the quality of test and calibration results to accommodation, environmental conditions, and purchasing.

ISO17025 is applicable to laboratories that operate in a  multitude of business sectors, some of which include automotive, cosmetics, micro-electronics, petro-chemical, pharmaceutical and power generation.

What is ISO Guide 34
ISO Guide 34 provides the highest level of Quality Assurance, confirming the expertise of the manufacturer, the integrity of the production systems and the reliability of the Certified Reference Materials that it produces.

• Certified according to ISO 17025 / ISO Guide 34 under UKAS accreditation
• Manufactured in accordance with ASTM D 2162 (Standard Practice for basic calibration of master viscometers and viscosity standard oils)
• Density g/mL in accordance with ASTM D 1480
• Kinematic (cSt) & dynamic viscosity (mPa·s) given at all temperatures
• Standard Pack Size 500ml, available also in 5L, 10L, 20L 
• Fully traceable to National Standards
• Ensures full compliance to ASTM & IP test method protocol
• Tamper evident security packaging
• 2 Year shelf  life
• Manufactured in the United Kingdom

This product is not classified as hazardous to ship.

(Tariff Number 27.10.19.99)

Capillary Viscometer Recalibration

Custom Blending

Glass Capillary Viscometers

Thermostatic Baths & Circulators

Viscometer Holders & Hangers

Viscosity Baths

Viscosity Standards

Viscosity Testing Accessories

Paragon ISO 17025 / ISO Guide 34 certified viscosity standards are for the calibration and verification of glass capillary viscometers and other viscosity measuring equipment where operating temperature is controlled precisely. At Paragon Scientific we understand the importance of accurate calibration in your laboratory so we only source the highest quality raw materials for use in the manufacture of all our Viscosity Standards. Using only the best quality materials means that our standards are very stable in all environments, you will not experience \'flocking\' (associated with cool environments), discolouration or sedimentation.

We fully test our products at every given data point, so you can be assured that the certified value given is the most accurate available. There are no exceptions or disclaimers on our test certificates and labels, what you see is EXACTLY what you get.

Paragon Scientific Viscosity Standards are certified to BS/EN/IEC/ISO 17025

/ISO Guide 34, accredited by UKAS, and are manufactured and tested in accordance with the primary method for viscosity determination which references the value of water as 1.0034 mm2/s (cSt) at 20°C(1.0016 mPa·s (cP) at 20°C.)

What is meant by  UKAS
The United Kingdom Accreditation Service (UKAS) is the sole accreditation body recognised by the UK government to assess, against internationally recognised standards, organisations that provide certification, testing, inspection and calibration services. Accreditation by UKAS demonstrates the competence, impartiality and sustainable performance of these evaluators

What is BS/EN/ISO/IEC 17025
ISO 17025 is a recognised international standard that specifies the requirements for the competence to carry out testing and or calibrations to a standard dictated by international methods. The international standard requires that an accredited facility comply with all the requirements detailed within the varied sections of the standard. These sections range from assuring the quality of test and calibration results to accommodation, environmental conditions, and purchasing.

ISO17025 is applicable to laboratories that operate in a  multitude of business sectors, some of which include automotive, cosmetics, micro-electronics, petro-chemical, pharmaceutical and power generation.

What is ISO Guide 34
ISO Guide 34 provides the highest level of Quality Assurance, confirming the expertise of the manufacturer, the integrity of the production systems and the reliability of the Certified Reference Materials that it produces.

• Certified according to ISO 17025 / ISO Guide 34 under UKAS accreditation
• Manufactured in accordance with ASTM D 2162 (Standard Practice for basic calibration of master viscometers and viscosity standard oils)
• Density g/mL in accordance with ASTM D 1480
• Kinematic (cSt) & dynamic viscosity (mPa·s) given at all temperatures
• Standard Pack Size 500ml, available also in 5L, 10L, 20L 
• Fully traceable to National Standards
• Ensures full compliance to ASTM & IP test method protocol
• Tamper evident security packaging
• 2 Year shelf  life
• Manufactured in the United Kingdom

This product is not classified as hazardous to ship.

(Tariff Number 27.10.19.99)

Capillary Viscometer Recalibration

Custom Blending

Glass Capillary Viscometers

Thermostatic Baths & Circulators

Viscometer Holders & Hangers

Viscosity Baths

Viscosity Standards

Viscosity Testing Accessories

Paragon ISO 17025 / ISO Guide 34 certified viscosity standards are for the calibration and verification of glass capillary viscometers and other viscosity measuring equipment where operating temperature is controlled precisely. At Paragon Scientific we understand the importance of accurate calibration in your laboratory so we only source the highest quality raw materials for use in the manufacture of all our Viscosity Standards. Using only the best quality materials means that our standards are very stable in all environments, you will not experience 'flocking' (associated with cool environments), discolouration or sedimentation.

We fully test our products at every given data point, so you can be assured that the certified value given is the most accurate available. There are no exceptions or disclaimers on our test certificates and labels, what you see is EXACTLY what you get.

Paragon Scientific Viscosity Standards are certified to BS/EN/IEC/ISO 17025 /

ISO Guide 34, accredited by UKAS, and are manufactured and tested in accordance with the primary method for viscosity determination which references the value of water as 1.0034 mm2/s (cSt) at 20°C(1.0016 mPa·s (cP) at 20°C.)

What is meant by  UKAS
The United Kingdom Accreditation Service (UKAS) is the sole accreditation body recognised by the UK government to assess, against internationally recognised standards, organisations that provide certification, testing, inspection and calibration services. Accreditation by UKAS demonstrates the competence, impartiality and sustainable performance of these evaluators

What is BS/EN/ISO/IEC 17025
ISO 17025 is a recognised international standard that specifies the requirements for the competence to carry out testing and or calibrations to a standard dictated by international methods. The international standard requires that an accredited facility comply with all the requirements detailed within the varied sections of the standard. These sections range from assuring the quality of test and calibration results to accommodation, environmental conditions, and purchasing.

ISO17025 is applicable to laboratories that operate in a  multitude of business sectors, some of which include automotive, cosmetics, micro-electronics, petro-chemical, pharmaceutical and power generation.

What is ISO Guide 34
ISO Guide 34 provides the highest level of Quality Assurance, confirming the expertise of the manufacturer, the integrity of the production systems and the reliability of the Certified Reference Materials that it produces.

• Certified according to ISO 17025 / ISO Guide 34 under UKAS accreditation
• Manufactured in accordance with ASTM D 2162 (Standard Practice for basic calibration of master viscometers and viscosity standard oils)
• Density g/mL in accordance with ASTM D 1480
• Kinematic (cSt) & dynamic viscosity (mPa·s) given at all temperatures.
• Standard Pack Size 500ml, available also in 5L, 10L, 20L
• Fully traceable to National Standards
• Ensures full compliance to ASTM & IP test method protocol
• Tamper evident security packaging
• 2 Year shelf  life
• Manufactured in the United Kingdom

This product is not classified as hazardous to ship.

(Tariff Number 27.10.19.99)

Capillary Viscometer Recalibration

Custom Blending

Glass Capillary Viscometers

Thermostatic Baths & Circulators

Viscometer Holders & Hangers

Viscosity Baths

Viscosity Standards

Viscosity Testing Accessories

Paragon ISO 17025 / ISO Guide 34 certified viscosity standards are for the calibration and verification of glass capillary viscometers and other viscosity measuring equipment where operating temperature is controlled precisely. At Paragon Scientific we understand the importance of accurate calibration in your laboratory so we only source the highest quality raw materials for use in the manufacture of all our Viscosity Standards. Using only the best quality materials means that our standards are very stable in all environments, you will not experience 'flocking' (associated with cool environments), discolouration or sedimentation.

We fully test our products at every given data point, so you can be assured that the certified value given is the most accurate available. There are no exceptions or disclaimers on our test certificates and labels, what you see is EXACTLY what you get.

Paragon Scientific Viscosity Standards are certified to BS/EN/IEC/ISO 17025

/ISO Guide 34, accredited by UKAS, and are manufactured and tested in accordance with the primary method for viscosity determination which references the value of water as 1.0034 mm2/s (cSt) at 20°C(1.0016 mPa·s (cP) at 20°C.)

What is meant by  UKAS
The United Kingdom Accreditation Service (UKAS) is the sole accreditation body recognised by the UK government to assess, against internationally recognised standards, organisations that provide certification, testing, inspection and calibration services. Accreditation by UKAS demonstrates the competence, impartiality and sustainable performance of these evaluators

What is BS/EN/ISO/IEC 17025
ISO 17025 is a recognised international standard that specifies the requirements for the competence to carry out testing and or calibrations to a standard dictated by international methods. The international standard requires that an accredited facility comply with all the requirements detailed within the varied sections of the standard. These sections range from assuring the quality of test and calibration results to accommodation, environmental conditions, and purchasing.

ISO17025 is applicable to laboratories that operate in a  multitude of business sectors, some of which include automotive, cosmetics, micro-electronics, petro-chemical, pharmaceutical and power generation.

What is ISO Guide 34
ISO Guide 34 provides the highest level of Quality Assurance, confirming the expertise of the manufacturer, the integrity of the production systems and the reliability of the Certified Reference Materials that it produces.

• Certified according to ISO 17025 / ISO Guide 34 under UKAS accreditation
• Manufactured in accordance with ASTM D 2162 (Standard Practice for basic calibration of master viscometers and viscosity standard oils)
• Density g/mL in accordance with ASTM D 1480
• Kinematic (cSt) & dynamic viscosity (mPa·s) given at all temperatures
• Standard Pack Size 500ml, available also in 5L, 10L, 20L
• Fully traceable to National Standards
• Ensures full compliance to ASTM & IP test method protocol
• Tamper evident security packaging
• 2 Year shelf life
• Manufactured in the United Kingdom

This product is not classified as hazardous to ship.

(Tariff Number 27.10.19.99)

Capillary Viscometer Recalibration

Custom Blending

Glass Capillary Viscometers

Thermostatic Baths & Circulators

Viscometer Holders & Hangers

Viscosity Baths

Viscosity Standards

Viscosity Testing Accessories